Known Working Hardware

lwfitz · February 07, 2013, 08:09:36 PM

Post here with known working hardware and what, if any, work arounds/fixes were needed

This machine is a custom built and worked 100% OTB and is my main machine I use while working at home

Code Select


System:    Host: VSIDO-FX Kernel: 3.7-1.towo-siduction-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: VSIDO
Machine:   Mobo: ASUSTeK model: M5A97 LE R2.0 version: Rev 1.xx Bios: American Megatrends version: 0601 date: 07/17/2012
CPU:       Hexa core AMD FX-6200 Six-Core (-MCP-) cache: 12288 KB flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) 
           Clock Speeds: 1: 1400.00 MHz 2: 1400.00 MHz 3: 1400.00 MHz 4: 3800.00 MHz 5: 1400.00 MHz 6: 1400.00 MHz
Graphics:  Card: NVIDIA Device 0fc6 X.org: 1.12.4 driver: nvidia tty size: 80x24 Advanced Data: N/A for root 
Audio:     Card-1: NVIDIA Device 0e1b driver: snd_hda_intel Sound: ALSA ver: k3.7-1.towo-siduction-amd64
           Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2324.5GB (38.6% used) 1: id: /dev/sda model: ST31000524AS size: 1000.2GB 
           2: id: /dev/sdb model: Maxtor_6Y120M0 size: 120.0GB 3: id: /dev/sdc model: WDC_WD6400AAKS size: 640.1GB 
           4: id: /dev/sdd model: OCZ_VERTEX_PLUS size: 60.0GB 5: USB id: /dev/sde model: STORE_N_GO size: 4.0GB 
           6: USB id: /dev/sdf model: External_USB_3.0 size: 500.1GB 
Partition: ID: / size: 15G used: 7.5G (53%) fs: ext4 ID: /home size: 38G used: 8.6G (25%) fs: ext4 
           ID: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 37.0C mobo: 27.0C gpu: 33C 
           Fan Speeds (in rpm): cpu: 1829 fan-2: 370 fan-3: 976 
Info:      Processes: 252 Uptime: 3 days Memory: 1744.8/15986.2MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.34

Update:

If you have inxi installed then you can use

Code Select

sudo inxi -Fz -c24

and that will give you an output similar to mine. If you want to know more about inxi you can check out Sector11's Post

merelyjim · February 08, 2013, 06:04:35 AM

Okay, what tool did you use to product this data?

dizzie · February 08, 2013, 06:11:46 AM

Quote from: merelyjim on February 08, 2013, 06:04:35 AM
Okay, what tool did you use to product this data?

From a terminal type:

Code Select

inxi -F

lwfitz · February 08, 2013, 08:42:00 AM

Sorry, my mistake. Updated OP with the command I used.

merelyjim · February 08, 2013, 02:26:40 PM

Thanks for the comman-line tip, *

Code Select

Toshiba L675D-S7104:
System:    Host: greyvsido Kernel: 3.7-trunk-amd64 x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: VSIDO
Machine:   System: TOSHIBA product: Satellite L675D version: PSK3JU-08W02R serial: ZA289399K 
           Mobo: TOSHIBA model: NALAE version: 1.00 serial: 0123456789AB Bios: TOSHIBA version: 1.40 date: 08/26/2010
CPU:       Dual core AMD Turion II P560 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series] 
           X.org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 143x35 Advanced Data: N/A for root 
Audio:     Card-1: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] driver: snd_hda_intel 
           Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture ver: k3.7-trunk-amd64
Network:   Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169 
           IF: eth0 state: down mac: 1c:75:08:71:38:da
           Card-2: Realtek RTL8188CE 802.11b/g/n WiFi Adapter driver: rtl8192ce 
           IF: wlan0 state: up mac: 88:25:2c:ba:22:1b
Drives:    HDD Total Size: 1500.3GB (74.8% used) 1: id: /dev/sda model: TOSHIBA_MK5065GS size: 500.1GB 
           2: USB id: /dev/sdb model: HDS721010CLA332 size: 1000.2GB 
Partition: ID: / size: 399G used: 249G (66%) fs: ext4 ID: swap-1 size: 1.07GB used: 0.02GB (2%) fs: swap 
Sensors:   System Temperatures: cpu: 47.6C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 149 Uptime: 20:24 Memory: 586.9/3710.3MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.35

# Machine dual-boots with Windows Ocho without any problems. EUFI not installed on this machine, so none of the headache...
# Realtek issues addressed here: [url=http://vsido.org/index.php/topic,161.0.html]http://vsido.org/index.php/topic,161.0.html[/url]

VastOne · February 08, 2013, 02:38:28 PM

Phenom 955 - Built from scratch

Code Select

System:    Host: vsido Kernel: 3.7.0-6.dmz.1-liquorix-amd64 x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: VSIDO
Machine:   Mobo: Gigabyte model: GA-MA790X-UD4P version: x.x Bios: Award version: F9 date: 11/20/2009
CPU:       Quad core AMD Phenom II X4 955 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 3200.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card: NVIDIA G96 [GeForce 9500 GT] X.org: 1.12.4 driver: nvidia Resolution: 80x24 
Audio:     Card: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture ver: k3.7.0-6.dmz.1-liquorix-amd64
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth0 state: up speed: 10 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 1750.4GB (30.6% used) 1: id: /dev/sda model: WDC_WD1001FALS size: 1000.2GB 
           2: id: /dev/sdb model: Hitachi_HTS72757 size: 750.2GB 
Partition: ID: / size: 80G used: 13G (18%) fs: ext4 
Sensors:   System Temperatures: cpu: 42.0C mobo: 36.0C gpu: 42C 
           Fan Speeds (in rpm): cpu: 1078 fan-1: 2227 fan-3: 1700 fan-5: 0 
Info:      Processes: 148 Uptime: 9:36 Memory: 597.3/7977.8MB Runlevel: 2 Client: Shell (bash) inxi: 1.8.35

Sector11 · February 08, 2013, 03:16:26 PM

I have a simple machine - and every VSIDO I have thrown at it just works!

Code Select

System:    Host: sector11 Kernel: 3.7.0-5.dmz.2-liquorix-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: VSIDO
Machine:   Mobo: ECS model: MCP61M-M3 version: 7.0 Bios: American Megatrends version: 080015 date: 11/03/2010
CPU:       Triple core AMD Athlon II X3 450 (-MCP-) cache: 1536 KB flags: (lm nx pae sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 3214.620 MHz 2: 3214.620 MHz 3: 3214.620 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210] X.Org: 1.12.4 driver: nvidia Resolution: 1280x1024@60.0hz 
           GLX Renderer: GeForce 210/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 313.18
Audio:     Card-1: NVIDIA MCP61 High Definition Audio driver: snd_hda_intel Sound: ALSA ver: k3.7.0-5.dmz.2-liquorix-amd64
           Card-2: NVIDIA High Definition Audio Controller driver: snd_hda_intel 
Network:   Card: NVIDIA MCP61 Ethernet driver: forcedeth 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 504.1GB (25.1% used) 1: id: /dev/sda model: WDC_WD2500AAJS size: 250.1GB 
           2: USB id: /dev/sdb model: Cruzer_Edge size: 4.0GB 3: id: /dev/sdc model: HM250HI size: 250.1GB 
Partition: ID: / size: 15G used: 7.8G (56%) fs: ext4 ID: /home size: 15G used: 1.7G (12%) fs: ext4 
           ID: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 51.0C mobo: 41.0C gpu: 51C 
           Fan Speeds (in rpm): cpu: 3118 fan-2: 0 fan-3: 0 
Info:      Processes: 144 Uptime: 4:19 Memory: 512.3/5962.5MB Client: Shell (bash) inxi: 1.8.34

OH OH: Kernel Alert!
3.7.0-5.dmz.2-liquorix-amd64 → → to → → 3.7.0-6.dmz.1-liquorix-amd64

VastOne · February 08, 2013, 03:39:49 PM

^ As seen in Liquorix News

Sector11 · February 08, 2013, 04:10:21 PM

↑ Shhhhhhhh I'm slow

Besides I'm busy testing a new USB install and wondering why nvidia-settings works perfectly with that and not with my default install.

lwfitz · February 09, 2013, 12:58:44 AM

My main office PC

Code Select

System:    Host: VSIDO-MSI Kernel: 3.6-trunk-amd64 x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: Debian GNU/Linux 7.0
Machine:   Mobo: MSI model: 870S-G46 (MS-7599) version: 4.0 Bios: American Megatrends version: V17.13 date: 06/29/2011
CPU:       Quad core AMD Phenom II X4 840 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card: NVIDIA GF104 [GeForce GTX 460] X.org: 1.12.4 driver: nvidia tty size: 80x24 Advanced Data: N/A for root 
Audio:     Card-1: NVIDIA GF104 High Definition Audio Controller driver: snd_hda_intel Sound: ALSA ver: 1.0.25
           Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 1280.3GB (3.3% used) 1: id: /dev/sda model: WDC_WD1600JS size: 160.0GB 
           2: id: /dev/sdb model: KINGSTON_SH103S3 size: 120.0GB 3: id: /dev/sdc model: WDC_WD10EACS size: 1000.2GB 
Partition: ID: / size: 15G used: 6.0G (43%) fs: ext4 ID: /home size: 129G used: 374M (1%) fs: ext4 
           ID: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 29.0C mobo: N/A gpu: 47C 
           Fan Speeds (in rpm): cpu: 2555 fan-2: 1033 fan-3: 1120 
Info:      Processes: 155 Uptime: 4 min Memory: 490.0/10023.8MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.35

dizzie · February 13, 2013, 01:09:41 AM

http://fredslev.dk/2013/project-hardware/

jedi · February 13, 2013, 01:24:01 AM

The Lappy;

Code Select

System:    Host: jedsdesk Kernel: 3.7-trunk-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: VSIDO
Machine:   System: Dell product: Dell System XPS 15Z
           Mobo: Dell model: N/A Bios: Dell version: A10 date: 02/20/2012
CPU:       Dual core Intel Core i7-2640M CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) 
           Clock Speeds: 1: 2801.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics Controller 
           Card-2: NVIDIA GF108 [GeForce GT 540M] 
           X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz 
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 8.0.5
Audio:     Card: Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture ver: k3.7-trunk-amd64
Network:   Card-1: Intel Centrino Advanced-N 6230 [Rainbow Peak] driver: iwlwifi 
           IF: wlan0 state: up mac: 88:53:2e:cc:f9:0c
           Card-2: Atheros AR8151 v2.0 Gigabit Ethernet driver: atl1c 
           IF: eth0 state: down mac: 84:8f:69:cd:26:89
Drives:    HDD Total Size: 256.1GB (25.2% used) 1: id: /dev/sda model: LITEONIT_LCT size: 256.1GB 
Partition: ID: / size: 25G used: 8.2G (36%) fs: ext4 ID: /home size: 125G used: 46G (39%) fs: ext4 
           ID: swap-1 size: 4.19GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 54.0C mobo: 54.0C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 148 Uptime: 18:03 Memory: 623.5/7899.7MB Client: Shell (bash) inxi: 1.8.27

jst_joe · February 13, 2013, 05:51:29 AM

I built this one back in the beginning of 2010.

Code Select

System:    Host: vsido Kernel: 3.7.0-6.dmz.2-liquorix-amd64 x86_64 (64 bit) 
           Desktop: Openbox 3.5.0 Distro: Debian GNU/Linux 7.0
Machine:   Mobo: Gigabyte model: GA-MA785GM-US2H version: x.x Bios: Award version: F8 date: 03/09/2010
CPU:       Quad core AMD Phenom II X4 940 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] 
           X.org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 156x57 Advanced Data: N/A for root 
Audio:     Card-1: Advanced Micro Devices [AMD] nee ATI RV770 HDMI Audio [Radeon HD 4850/4870] driver: snd_hda_intel 
           Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture ver: k3.7.0-6.dmz.2-liquorix-amd64
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8168 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 1564.3GB (24.4% used) 1: id: /dev/sda model: WDC_WD2500BEVT size: 250.1GB 
           2: id: /dev/sdc model: WDC_WD2500BEVT size: 250.1GB 3: id: /dev/sdb model: WDC_SSC size: 64.0GB 
           4: id: /dev/sdd model: WDC_WD10EARS size: 1000.2GB 
Partition: ID: / size: 18G used: 8.5G (51%) fs: ext4 ID: /home size: 9.9G used: 2.5G (27%) fs: ext4 
           ID: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 43.0C mobo: 40.0C gpu: 50.0 
           Fan Speeds (in rpm): cpu: 1126 fan-2: 1626 fan-3: 0 fan-4: 814 
Info:      Processes: 145 Uptime: 1:23 Memory: 441.9/7976.0MB Client: Shell (sudo) inxi: 1.8.36

dizzie · February 13, 2013, 01:45:22 PM

So many Gigabyte mainboards

McLovin · February 13, 2013, 08:19:31 PM

My system is based from a Dell Studio XPS8000, then custmized and upgraded with various items, all that is left from the original system is the mobo and cpu, and I have updated the bios to the latest version, still looking for a custom Bios to flash onto this thing to unlock it.

Code Select

System:    Host: vsido Kernel: 3.8.0-rc7-mclovin x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: VSIDO
Machine:   System: Dell product: Studio XPS 8000
           Mobo: Dell model: 0X231R version: A00 Bios: Dell version: A03 date: 12/21/2009
CPU:       Quad core Intel Core i7 CPU 860 (-HT-MCP-) cache: 8192 KB flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) 
           Clock Speeds: 1: 2792.811 MHz 2: 2792.811 MHz 3: 2792.811 MHz 4: 2792.811 MHz 5: 2792.811 MHz 6: 2792.811 MHz 7: 2792.811 MHz 8: 2792.811 MHz
Graphics:  Card: NVIDIA GF104 [GeForce GTX 460] X.Org: 1.12.4 driver: nvidia Resolution: 1920x1080@60.0hz 
           GLX Renderer: GeForce GTX 460/PCIe/SSE2 GLX Version: 4.3.0 NVIDIA 310.32
Audio:     Card-1: NVIDIA GF104 High Definition Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.8.0-rc7-mclovin
           Card-2: Intel 5 Series/3400 Series Chipset High Definition Audio driver: snd_hda_intel 
           Card-3: Dynex driver: USB Audio 
Network:   Card-1: Broadcom NetLink BCM57780 Gigabit Ethernet PCIe driver: tg3 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
           Card-2: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 driver: tulip 
           IF: eth1 state: unknown speed: N/A duplex: N/A mac: <filter>
Drives:    HDD Total Size: 5001.0GB (46.0% used) 1: id: /dev/sdb model: ST31000528AS size: 1000.2GB 
           2: id: /dev/sdc model: ST33000651AS size: 3000.6GB 3: id: /dev/sda model: ST31000528AS size: 1000.2GB 
Partition: ID: / size: 28G used: 9.7G (38%) fs: ext4 ID: /home size: 37G used: 14G (40%) fs: ext4 
           ID: swap-1 size: 2.05GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 22.0C mobo: 127.0C gpu: 43C 
           Fan Speeds (in rpm): cpu: 2057 fan-1: 833 
Info:      Processes: 211 Uptime: 6 min Memory: 608.4/9973.5MB Client: Shell (bash) inxi: 1.8.36

Everything worked out of the box, though I did install my custom kernel, and the Nvidia prop. drivers, which did require some finesse due to the location of where my custom kernels put the header files, so unless you use a custom kernel, they should install just fine for you.

News:

Known Working Hardware