Post here with known working hardware and what, if any, work arounds/fixes were needed
This machine is a custom built and worked 100% OTB and is my main machine I use while working at home
System: Host: VSIDO-FX Kernel: 3.7-1.towo-siduction-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: VSIDO
Machine: Mobo: ASUSTeK model: M5A97 LE R2.0 version: Rev 1.xx Bios: American Megatrends version: 0601 date: 07/17/2012
CPU: Hexa core AMD FX-6200 Six-Core (-MCP-) cache: 12288 KB flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm)
Clock Speeds: 1: 1400.00 MHz 2: 1400.00 MHz 3: 1400.00 MHz 4: 3800.00 MHz 5: 1400.00 MHz 6: 1400.00 MHz
Graphics: Card: NVIDIA Device 0fc6 X.org: 1.12.4 driver: nvidia tty size: 80x24 Advanced Data: N/A for root
Audio: Card-1: NVIDIA Device 0e1b driver: snd_hda_intel Sound: ALSA ver: k3.7-1.towo-siduction-amd64
Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 2324.5GB (38.6% used) 1: id: /dev/sda model: ST31000524AS size: 1000.2GB
2: id: /dev/sdb model: Maxtor_6Y120M0 size: 120.0GB 3: id: /dev/sdc model: WDC_WD6400AAKS size: 640.1GB
4: id: /dev/sdd model: OCZ_VERTEX_PLUS size: 60.0GB 5: USB id: /dev/sde model: STORE_N_GO size: 4.0GB
6: USB id: /dev/sdf model: External_USB_3.0 size: 500.1GB
Partition: ID: / size: 15G used: 7.5G (53%) fs: ext4 ID: /home size: 38G used: 8.6G (25%) fs: ext4
ID: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 37.0C mobo: 27.0C gpu: 33C
Fan Speeds (in rpm): cpu: 1829 fan-2: 370 fan-3: 976
Info: Processes: 252 Uptime: 3 days Memory: 1744.8/15986.2MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.34
Update:
If you have inxi installed then you can use
sudo inxi -Fz -c24
and that will give you an output similar to mine. If you want to know more about inxi you can check out Sector11's Post (http://vsido.org/index.php/topic,21.0.html)
Okay, what tool did you use to product this data?
Quote from: merelyjim on February 08, 2013, 06:04:35 AM
Okay, what tool did you use to product this data?
From a terminal type:
inxi -F
Sorry, my mistake. Updated OP with the command I used.
Thanks for the comman-line tip, *
Toshiba L675D-S7104:
System: Host: greyvsido Kernel: 3.7-trunk-amd64 x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: VSIDO
Machine: System: TOSHIBA product: Satellite L675D version: PSK3JU-08W02R serial: ZA289399K
Mobo: TOSHIBA model: NALAE version: 1.00 serial: 0123456789AB Bios: TOSHIBA version: 1.40 date: 08/26/2010
CPU: Dual core AMD Turion II P560 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm)
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz
Graphics: Card: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series]
X.org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 143x35 Advanced Data: N/A for root
Audio: Card-1: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.7-trunk-amd64
Network: Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169
IF: eth0 state: down mac: 1c:75:08:71:38:da
Card-2: Realtek RTL8188CE 802.11b/g/n WiFi Adapter driver: rtl8192ce
IF: wlan0 state: up mac: 88:25:2c:ba:22:1b
Drives: HDD Total Size: 1500.3GB (74.8% used) 1: id: /dev/sda model: TOSHIBA_MK5065GS size: 500.1GB
2: USB id: /dev/sdb model: HDS721010CLA332 size: 1000.2GB
Partition: ID: / size: 399G used: 249G (66%) fs: ext4 ID: swap-1 size: 1.07GB used: 0.02GB (2%) fs: swap
Sensors: System Temperatures: cpu: 47.6C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 149 Uptime: 20:24 Memory: 586.9/3710.3MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.35
# Machine dual-boots with Windows Ocho without any problems. EUFI not installed on this machine, so none of the headache...
# Realtek issues addressed here: [url=http://vsido.org/index.php/topic,161.0.html]http://vsido.org/index.php/topic,161.0.html[/url]
Phenom 955 - Built from scratch
System: Host: vsido Kernel: 3.7.0-6.dmz.1-liquorix-amd64 x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: VSIDO
Machine: Mobo: Gigabyte model: GA-MA790X-UD4P version: x.x Bios: Award version: F9 date: 11/20/2009
CPU: Quad core AMD Phenom II X4 955 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm)
Clock Speeds: 1: 3200.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics: Card: NVIDIA G96 [GeForce 9500 GT] X.org: 1.12.4 driver: nvidia Resolution: 80x24
Audio: Card: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.7.0-6.dmz.1-liquorix-amd64
Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: up speed: 10 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1750.4GB (30.6% used) 1: id: /dev/sda model: WDC_WD1001FALS size: 1000.2GB
2: id: /dev/sdb model: Hitachi_HTS72757 size: 750.2GB
Partition: ID: / size: 80G used: 13G (18%) fs: ext4
Sensors: System Temperatures: cpu: 42.0C mobo: 36.0C gpu: 42C
Fan Speeds (in rpm): cpu: 1078 fan-1: 2227 fan-3: 1700 fan-5: 0
Info: Processes: 148 Uptime: 9:36 Memory: 597.3/7977.8MB Runlevel: 2 Client: Shell (bash) inxi: 1.8.35
I have a simple machine - and every VSIDO I have thrown at it just works!
System: Host: sector11 Kernel: 3.7.0-5.dmz.2-liquorix-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: VSIDO
Machine: Mobo: ECS model: MCP61M-M3 version: 7.0 Bios: American Megatrends version: 080015 date: 11/03/2010
CPU: Triple core AMD Athlon II X3 450 (-MCP-) cache: 1536 KB flags: (lm nx pae sse sse2 sse3 sse4a svm)
Clock Speeds: 1: 3214.620 MHz 2: 3214.620 MHz 3: 3214.620 MHz
Graphics: Card: NVIDIA GT218 [GeForce 210] X.Org: 1.12.4 driver: nvidia Resolution: 1280x1024@60.0hz
GLX Renderer: GeForce 210/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 313.18
Audio: Card-1: NVIDIA MCP61 High Definition Audio driver: snd_hda_intel Sound: ALSA ver: k3.7.0-5.dmz.2-liquorix-amd64
Card-2: NVIDIA High Definition Audio Controller driver: snd_hda_intel
Network: Card: NVIDIA MCP61 Ethernet driver: forcedeth
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 504.1GB (25.1% used) 1: id: /dev/sda model: WDC_WD2500AAJS size: 250.1GB
2: USB id: /dev/sdb model: Cruzer_Edge size: 4.0GB 3: id: /dev/sdc model: HM250HI size: 250.1GB
Partition: ID: / size: 15G used: 7.8G (56%) fs: ext4 ID: /home size: 15G used: 1.7G (12%) fs: ext4
ID: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 51.0C mobo: 41.0C gpu: 51C
Fan Speeds (in rpm): cpu: 3118 fan-2: 0 fan-3: 0
Info: Processes: 144 Uptime: 4:19 Memory: 512.3/5962.5MB Client: Shell (bash) inxi: 1.8.34
OH OH: Kernel Alert!
3.7.0-5.dmz.2-liquorix-amd64 → → to → → 3.7.0-6.dmz.1-liquorix-amd64
^ As seen in Liquorix News (http://vsido.org/index.php/topic,167.0.html) ;)
↑ Shhhhhhhh I'm slow :D
Besides I'm busy testing a new USB install and wondering why nvidia-settings works perfectly with that and not with my default install.
My main office PC
System: Host: VSIDO-MSI Kernel: 3.6-trunk-amd64 x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: Debian GNU/Linux 7.0
Machine: Mobo: MSI model: 870S-G46 (MS-7599) version: 4.0 Bios: American Megatrends version: V17.13 date: 06/29/2011
CPU: Quad core AMD Phenom II X4 840 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm)
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics: Card: NVIDIA GF104 [GeForce GTX 460] X.org: 1.12.4 driver: nvidia tty size: 80x24 Advanced Data: N/A for root
Audio: Card-1: NVIDIA GF104 High Definition Audio Controller driver: snd_hda_intel Sound: ALSA ver: 1.0.25
Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1280.3GB (3.3% used) 1: id: /dev/sda model: WDC_WD1600JS size: 160.0GB
2: id: /dev/sdb model: KINGSTON_SH103S3 size: 120.0GB 3: id: /dev/sdc model: WDC_WD10EACS size: 1000.2GB
Partition: ID: / size: 15G used: 6.0G (43%) fs: ext4 ID: /home size: 129G used: 374M (1%) fs: ext4
ID: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 29.0C mobo: N/A gpu: 47C
Fan Speeds (in rpm): cpu: 2555 fan-2: 1033 fan-3: 1120
Info: Processes: 155 Uptime: 4 min Memory: 490.0/10023.8MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.35
http://fredslev.dk/2013/project-hardware/ (http://fredslev.dk/2013/project-hardware/) ;D
The Lappy;
System: Host: jedsdesk Kernel: 3.7-trunk-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: VSIDO
Machine: System: Dell product: Dell System XPS 15Z
Mobo: Dell model: N/A Bios: Dell version: A10 date: 02/20/2012
CPU: Dual core Intel Core i7-2640M CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 2801.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics: Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Card-2: NVIDIA GF108 [GeForce GT 540M]
X.Org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz
GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 8.0.5
Audio: Card: Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.7-trunk-amd64
Network: Card-1: Intel Centrino Advanced-N 6230 [Rainbow Peak] driver: iwlwifi
IF: wlan0 state: up mac: 88:53:2e:cc:f9:0c
Card-2: Atheros AR8151 v2.0 Gigabit Ethernet driver: atl1c
IF: eth0 state: down mac: 84:8f:69:cd:26:89
Drives: HDD Total Size: 256.1GB (25.2% used) 1: id: /dev/sda model: LITEONIT_LCT size: 256.1GB
Partition: ID: / size: 25G used: 8.2G (36%) fs: ext4 ID: /home size: 125G used: 46G (39%) fs: ext4
ID: swap-1 size: 4.19GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 54.0C mobo: 54.0C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 148 Uptime: 18:03 Memory: 623.5/7899.7MB Client: Shell (bash) inxi: 1.8.27
I built this one back in the beginning of 2010.
System: Host: vsido Kernel: 3.7.0-6.dmz.2-liquorix-amd64 x86_64 (64 bit)
Desktop: Openbox 3.5.0 Distro: Debian GNU/Linux 7.0
Machine: Mobo: Gigabyte model: GA-MA785GM-US2H version: x.x Bios: Award version: F8 date: 03/09/2010
CPU: Quad core AMD Phenom II X4 940 (-MCP-) cache: 2048 KB flags: (lm nx pae sse sse2 sse3 sse4a svm)
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics: Card: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850]
X.org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 156x57 Advanced Data: N/A for root
Audio: Card-1: Advanced Micro Devices [AMD] nee ATI RV770 HDMI Audio [Radeon HD 4850/4870] driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.7.0-6.dmz.2-liquorix-amd64
Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1564.3GB (24.4% used) 1: id: /dev/sda model: WDC_WD2500BEVT size: 250.1GB
2: id: /dev/sdc model: WDC_WD2500BEVT size: 250.1GB 3: id: /dev/sdb model: WDC_SSC size: 64.0GB
4: id: /dev/sdd model: WDC_WD10EARS size: 1000.2GB
Partition: ID: / size: 18G used: 8.5G (51%) fs: ext4 ID: /home size: 9.9G used: 2.5G (27%) fs: ext4
ID: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 43.0C mobo: 40.0C gpu: 50.0
Fan Speeds (in rpm): cpu: 1126 fan-2: 1626 fan-3: 0 fan-4: 814
Info: Processes: 145 Uptime: 1:23 Memory: 441.9/7976.0MB Client: Shell (sudo) inxi: 1.8.36
So many Gigabyte mainboards ;D
My system is based from a Dell Studio XPS8000, then custmized and upgraded with various items, all that is left from the original system is the mobo and cpu, and I have updated the bios to the latest version, still looking for a custom Bios to flash onto this thing to unlock it.
System: Host: vsido Kernel: 3.8.0-rc7-mclovin x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: VSIDO
Machine: System: Dell product: Studio XPS 8000
Mobo: Dell model: 0X231R version: A00 Bios: Dell version: A03 date: 12/21/2009
CPU: Quad core Intel Core i7 CPU 860 (-HT-MCP-) cache: 8192 KB flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 2792.811 MHz 2: 2792.811 MHz 3: 2792.811 MHz 4: 2792.811 MHz 5: 2792.811 MHz 6: 2792.811 MHz 7: 2792.811 MHz 8: 2792.811 MHz
Graphics: Card: NVIDIA GF104 [GeForce GTX 460] X.Org: 1.12.4 driver: nvidia Resolution: 1920x1080@60.0hz
GLX Renderer: GeForce GTX 460/PCIe/SSE2 GLX Version: 4.3.0 NVIDIA 310.32
Audio: Card-1: NVIDIA GF104 High Definition Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.8.0-rc7-mclovin
Card-2: Intel 5 Series/3400 Series Chipset High Definition Audio driver: snd_hda_intel
Card-3: Dynex driver: USB Audio
Network: Card-1: Broadcom NetLink BCM57780 Gigabit Ethernet PCIe driver: tg3
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Card-2: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 driver: tulip
IF: eth1 state: unknown speed: N/A duplex: N/A mac: <filter>
Drives: HDD Total Size: 5001.0GB (46.0% used) 1: id: /dev/sdb model: ST31000528AS size: 1000.2GB
2: id: /dev/sdc model: ST33000651AS size: 3000.6GB 3: id: /dev/sda model: ST31000528AS size: 1000.2GB
Partition: ID: / size: 28G used: 9.7G (38%) fs: ext4 ID: /home size: 37G used: 14G (40%) fs: ext4
ID: swap-1 size: 2.05GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 22.0C mobo: 127.0C gpu: 43C
Fan Speeds (in rpm): cpu: 2057 fan-1: 833
Info: Processes: 211 Uptime: 6 min Memory: 608.4/9973.5MB Client: Shell (bash) inxi: 1.8.36
Everything worked out of the box, though I did install my custom kernel, and the Nvidia prop. drivers, which did require some finesse due to the location of where my custom kernels put the header files, so unless you use a custom kernel, they should install just fine for you.
Quote from: dizzie on February 13, 2013, 01:45:22 PM
So many Gigabyte mainboards ;D
I've no complaints with this one at all.
I might would even recommend one to a friend. ;D
Not at all, hehe and as you can see here http://fredslev.dk/2013/project-hardware/ (http://fredslev.dk/2013/project-hardware/) i like Gigabyte :D
Asus G73-JH 17.3" Laptop. Only thing that didnt work out of the box is the light up keyboard (havent even tried to get it working yet).
System: Host: ASUS-Laptop Kernel: 3.7.0-1.dmz.6-liquorix-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: VSIDO
Machine: System: ASUSTeK (portable) product: G73Jh version: 1.0
Mobo: ASUSTeK model: G73Jh version: 1.0 Bios: American Megatrends version: G73Jh.213 date: 01/27/2011
CPU: Quad core Intel Core i7 CPU Q 740 (-HT-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 933.00 MHz 2: 933.00 MHz 3: 933.00 MHz 4: 933.00 MHz 5: 1734.00 MHz 6: 933.00 MHz 7: 933.00 MHz 8: 933.00 MHz
Graphics: Card: Advanced Micro Devices [AMD] nee ATI Broadway XT [Mobility Radeon HD 5800 Series]
X.org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 80x24 Advanced Data: N/A for root
Audio: Card-1: Intel 5 Series/3400 Series Chipset High Definition Audio driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD] nee ATI Juniper HDMI Audio [Radeon HD 5700 Series] driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.7.0-1.dmz.6-liquorix-amd64
Network: Card-1: Intel Centrino Advanced-N + WiMAX 6250 [Kilmer Peak] driver: iwlwifi
IF: wlan0 state: up mac: <filter>
Card-2: Atheros AR8131 Gigabit Ethernet driver: atl1c
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 500.1GB (2.5% used) 1: id: /dev/sda model: ST95005620AS size: 500.1GB
Partition: ID: / size: 21G used: 7.4G (39%) fs: ext4 ID: /home size: 435G used: 4.4G (2%) fs: ext4
ID: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 48.0C mobo: N/A gpu: 67.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 184 Uptime: 2:35 Memory: 1086.2/15948.9MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.38
The new laptop running in a Live session. Will update once I'm done playing around with partitioning schemes!
Resuming in non X mode: glxinfo not found. For package install advice run: inxi --recommends
System: Host: vsido Kernel: 3.7-trunk-amd64 x86_64 (64 bit) Desktop: Xfce 4.10.0 Distro: VSIDO
Machine: Mobo: Micro-Star model: MS-16F3 version: REV:1.0 serial: BSS-0123456789
Bios: American Megatrends version: E16F3IMS.50K date: 09/18/2012
CPU: Quad core Intel Core i7-3630QM CPU (-HT-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 1200.00 MHz 2: 1200.00 MHz 3: 1200.00 MHz 4: 1200.00 MHz 5: 1200.00 MHz 6: 1200.00 MHz 7: 1200.00 MHz 8: 1200.00 MHz
Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller
Card-2: NVIDIA Device 1212
X.org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) tty size: 80x24 Advanced Data: N/A for root
Audio: Card: Intel 7 Series/C210 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.7-trunk-amd64
Network: Card-1: Atheros Device e091
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Card-2: Intel Centrino Wireless-N 2230 driver: iwlwifi
IF: wlan0 state: up mac: 84:a6:c8:09:f0:c4
Drives: HDD Total Size: 1136.6GB (0.1% used) 1: id: /dev/sdc model: Samsung_SSD_840 size: 120.0GB
2: id: /dev/sda model: ST1000LM024_HN size: 1000.2GB 3: USB id: /dev/sdb model: v165w size: 16.4GB
Partition: ID: / size: 16G used: 176M (2%) fs: rootfs
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 51.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 177 Uptime: 2:22 Memory: 528.2/32137.3MB Runlevel: 2 Client: Shell (sudo) inxi: 1.8.38
Very nice Jed!
And as promised here it is with everything freshly built and newly released from the chains of MS Windoze 8 64bit! Wiped the drive, installed VSIDO and good to go! ;D
System: Host: MSI-Laptop Kernel: 3.7-trunk-amd64 x86_64 (64 bit) Desktop: Fluxbox 1.3.5 Distro: VSIDO
Machine: Mobo: Micro-Star model: MS-16F3 version: REV:1.0 serial: BSS-0123456789
Bios: American Megatrends version: E16F3IMS.50K date: 09/18/2012
CPU: Quad core Intel Core i7-3630QM CPU (-HT-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 1200.00 MHz 2: 1200.00 MHz 3: 1200.00 MHz 4: 1200.00 MHz 5: 1200.00 MHz 6: 1200.00 MHz 7: 1200.00 MHz 8: 2401.00 MHz
Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller
Card-2: NVIDIA Device 1212
X.org: 1.12.4 drivers: intel (unloaded: fbdev,vesa) tty size: 80x24 Advanced Data: N/A for root
Audio: Card: Intel 7 Series/C210 Series Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.7-trunk-amd64
Network: Card-1: Atheros Device e091
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Card-2: Intel Centrino Wireless-N 2230 driver: iwlwifi
IF: wlan0 state: up mac: 84:a6:c8:09:f0:c4
Drives: HDD Total Size: 1120.2GB (21.4% used) 1: id: /dev/sdb model: Samsung_SSD_840 size: 120.0GB
2: id: /dev/sda model: ST1000LM024_HN size: 1000.2GB
Partition: ID: / size: 25G used: 6.9G (30%) fs: ext4 ID: /home size: 86G used: 32G (39%) fs: ext4
ID: swap-1 size: 1.05GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 185 Uptime: 1 day Memory: 884.9/32137.3MB Client: Shell (sudo) inxi: 1.8.45
jed@MSI-Laptop:~$
Here's my first custom built box, from about a month ago. Previously, I had a dual-core Athlon 64X2 HP, which has lasted for about 4 years. It'll now be my roommates. I wanted at least a quad core for the build, and couldn't pass up the 6 core when I saw it. I'm of modest means and the tax refund would only go so far ;) I went with the ECS mobo, just because the HP had one, and I knew it could take an environmental beating.
System: Host: Kernel: 3.7.0-10.dmz.2-liquorix-amd64 x86_64 (64 bit)
Desktop: Fluxbox 1.3.5 Distro: VSIDO
Machine: Mobo: ECS model: A970M-A DELUXE version: 1.0 Bios: American Megatrends version: 4.6.5 date: 11/09/2012
CPU: Hexa core AMD FX-6300 Six-Core (-MCP-) cache: 12288 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm)
Clock Speeds: 1: 1400.00 MHz 2: 3500.00 MHz 3: 1400.00 MHz 4: 1400.00 MHz 5: 1400.00 MHz 6: 1400.00 MHz
Graphics: Card: NVIDIA Device 0fc6 [GTX 650] X.org: 1.12.4 driver: nvidia tty size: 80x24 Advanced Data: N/A for root
Audio: Card-1: NVIDIA Device 0e1b driver: snd_hda_intel Sound: ALSA ver: k3.7.0-10.dmz.2-liquorix-amd64
Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Network: Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: down mac: <filter>
Card-2: Atheros AR9300 Wireless LAN adaptor driver: ath9k
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 2000.4GB (12.7% used) 1: id: /dev/sda model: SAMSUNG_HD501LJ size: 500.1GB
2: id: /dev/sdb model: ST1000DM003 size: 1000.2GB 3: USB id: /dev/sdc model: 0AS size: 500.1GB
Partition: ID: / size: 185G used: 6.8G (4%) fs: ext4 ID: swap-1 size: 17.44GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 19.6C mobo: N/A gpu: 31C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 179 Uptime: 3:43
Very nice Jefsview :) i pushed my FX-6100 to 4.6ghz last night, why? Because i can ;D