I can do that.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts Menu--SETTINGS AND PREFERENCES--SETTINGS AND PREFERENCES--SETTINGS AND PREFERENCES
function weather_settings()--#### DO NOT EDIT THIS LINE #################
--#######################################################################
--[[set update interval. update interval is based on conky cycles
if your conkyrc has an update_interval of 1, ie updates every second
then if you enter 60 below, the script will update every 60 seconds
however, if your conkyrc update_interval is 10, then by setting 60 below,
v9000 will update every 600 seconds (10 minutes)]]
local update_interval=1800 --avoid an interval of 1
--get web address by going to the intellicast site and entering your location in the box
--click on "Extended Forecast" to get the necessary address
local web="http://www.intellicast.com/Local/Forecast.aspx?unit=F&location=USMO9688"--insert unit=C& after aspx? for C
--set location of weather images (replace "benjamin" with your own username)
local weathericons="/home/falldown/v9000/additional_files/weathericons_falldown/"
--short conditions setup
--this section allows you to set your own shorter terms to replace the terms foud in conditions
--to use for current: now["conditions_short"], now["conditions_short_caps"], now["conditions_short_lc"]
--to use for forecast: conditions_short[n], conditions_short_caps[n], conditions_short_lc[n]
--ALSO USE THIS TABLE TO ENTER CONDITIONS TRANSLATIONS
con_short={--start of table, put entries below in form eg: ["Thunderstorm"]="T.Strm",
["Wind Early"]="Wnd AM",
["Snow Showers"]="Sn Shws",
["Thunderstorm"]="T.Strm",--remember to put a comma at the end of every entry
["Scattered"]="Scat",
["Few Snow Showers"]="Fw Sn Shws",
["Wind"]="Wnd",
["Showers"]="Shws",
}--this bracket closes the table
--the script is capable of converting between several unit types
--set how many decimal places you want the conversions to show
local decimal_places=1
--some weather data options need to come with their own units attached as they can be NA on occasion
--set here what you want to have for units, or set "" for nothing
--include spaces, if desired, for formatting purposes.
--NOTE ALSO EDIT THESE SETTINGS FOR TRANSLATION PURPOSES
local visibility_unit=" mi"
local wind_mph_unit=" mph"
local wind_km_unit=" kmh"
local wind_kts_unit=" kts"
local ceiling_unit=" ft"
local wind_degrees_unit="°"
--do you want the script to use translation tables?
--set 1 if you want to translate, 0 if not.
--the translation tables are located below
local translate=0
--set alerts on or off, set to 0 so that the script does not check for alerts
--set 1 to check for alerts
local alert_check=1
--#######################################################################
--TRANSLATION TABLES, activate by setting translate=1 above
--use con_short table above to translate weather conditions
--edit units settings above to complete translation
--translate NESW text
neswtext={
S="t_S",
SSW="tsetSSW",
SW="t_SW",
WSW="t_WSW",
W="t_W",
WNW="t_WNW",
NW="t_NW",
NNW="t_NNW",
N="t_N",
NNE="t_NNE",
NE="t_NE",
ENE="t_ENE",
E="t_E",
ESE="t_ESE",
SE="t_SE",
SSE="t_SSE",
}--end of N E S W text table
--translate time suffix
tsuffix={
AM="t_AM",
PM="t_PM",
}--end of time suffix table
--enter translations for uv index text
uvindextext={
["Low"]="t_Low",
["Moderate"]="t_Moderate",
["High"]="t_High",
["Very High"]="t_Very High",--format is different because of the space in the text
["Extreme"]="t_Extreme",
}--end of uv text table
--enter translations for moonpahse
moonphases={
["New"]="t_New",
["Full"]="t_Full",
["First Quarter"]="t_First Quarter",
["Last Quarter"]="t_Last Quarter",
["Waning Gibbous"]="t_Waning Gibbous",
["Waning Crescent"]="t_Waning Crescent",
["Waxing Crescent"]="t_Waxing Crescent",
["Waxing Gibbous"]="t_Waxing Gibbous",
}--end of moon phase table
--enter translations for FULL day names
daynames={
Monday="t_Monday",
Tuesday="t_Tuesday",
Wednesday="t_Wednesday",
Thursday="t_Thursday",
Friday="t_Friday",
Saturday="t_Saturday",
Sunday="t_Sunday",
}--end day names table
--enter translations for SHORT day names
dayshort={
Monday="t_Mon",
Tuesday="t_Tue",
Wednesday="t_Wed",
Thursday="t_Thu",
Friday="t_Fri",
Saturday="t_Sat",
Sunday="t_Sun"
}--end short day names table
--enter translation for FULL month names
monthnames={
January="t_January",
February="t_February",
March="t_March",
April="t_April",
May="t_May",
June="t_June",
July="t_July",
August="t_August",
September="t_September",
October="t_October",
November="t_November",
December="t_December"
}--end of month name translations
--enter translations for SHORT month names
monthshort={
January="t_Jan",
February="t_Feb",
March="t_Mar",
April="t_Apr",
May="t_May",
June="t_Jun",
July="t_Jul",
August="t_Aug",
September="t_Sep",
October="t_Oct",
November="t_Nov",
December="t_Dec"
}--end of short month name translations
--enter some additional translations
additional={
NA="t_NA",
Unl="t_Unl"--for ceiling data option
}--end of additional translations
--END OF TRANSLATION TABLES
--#######################################################################
--NOTE if you make changes to these settings, they will only take effect at the next weather update
--or after killall conky and restart
--#######################################################################
if translate==1 then
return {update_interval,web,weathericons,con_short,decimal_places,visibility_unit,wind_mph_unit,wind_km_unit,wind_kts_unit,ceiling_unit,wind_degrees_unit,translate,alert_check,neswtext,tsuffix,uvindextext,moonphases,daynames,dayshort,monthnames,monthshort,additional}
else
return {update_interval,web,weathericons,con_short,decimal_places,visibility_unit,wind_mph_unit,wind_km_unit,wind_kts_unit,ceiling_unit,wind_degrees_unit,translate,alert_check}
end
end--OF SETTINGS AND PREFERENCES ########################################
--#######################################################################
##############################################
# Settings
##############################################
max_specials 10000
max_user_text 1500000
background no
use_xft yes
#xftfont Sans:size=12
#xftalpha 1
font Mono:size=8
total_run_times 0
own_window yes
own_window_argb_visual yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 230 750
maximum_width 230
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
default_color white
default_shade_color black
default_outline_color white
alignment middle_left
gap_x 10
gap_y 10
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
color1 86acad #darker blue
color2 b1c9c9 #lighter blue
text_buffer_size 100000
top_name_width 10
update_interval 1
lua_load /home/falldown/v9000/bargraph.lua
lua_load /home/falldown/v9000/v9000.lua
lua_draw_hook_post weather
lua_load /home/falldown/v9000/config.lua
TEXT
--DISPLAY FUNCTION--DISPLAY FUNCTION--DISPLAY FUNCTION--DISPLAY FUNCTION-
_G.weather_script = function()--#### DO NOT EDIT THIS LINE ##############
--#######################################################################
--## CALL bargraph.lua ##################################################
function conky_main()
conky_main_bars()
end
--#######################################################################
--these tables hold the coordinates for each repeat do not edit #########
top_left_x_coordinate={}--###############################################
top_left_y_coordinate={}--###############################################
--#######################################################################
--SET DEFAULTS ##########################################################
--set defaults do not localise these defaults if you use a seperate display script
default_font="LaudatioC"--font must be in quotes
default_font_size=12
default_color=0xffffff--white
default_alpha=1--fully opaque
default_image_width=50
default_image_height=50
--END OF DEFAULTS #######################################################
--START OF WEATHER CODE -- START OF WEATHER CODE -- START OF WEATHER CODE
--#######################################################################
--background start#######################################################
subtab={
{d="start",x=5.5,y=10.5},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=125},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=65,x=5,y=10,w=200,h=125,grad={{c=0x000000,a=1,p=0},{c=0x000000,a=1,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=5,y=10},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=125},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=80,x=5,y=10,w=200,h=125,grad={{c=0x000000,a=0.35,p=0.0},{c=0xffffff,a=0.35,p=0.71},{c=0xffffff,a=0.35,p=0.73},{c=0xffffff,a=0.35,p=0.75},{c=0x000000,a=0.0,p=1}},lw=1,sub=1,db=0,subtab=subtab})
--######################################################################
subtab={
{d="start",x=5.5,y=165.5},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=2,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=1,p=0},{c=0x000000,a=1,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=5,y=165},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=80,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=0.3,p=0.0},{c=0xffffff,a=0.35,p=0.67},{c=0xffffff,a=0.35,p=0.69},{c=0xffffff,a=0.35,p=0.71},{c=0x000000,a=0.2,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=10,y=200},
{d="rline",x=180,y=0},
{d="rline",x=0,y=1.5},
{d="rline",x=-180,y=0},
}
grec({g=2,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=0.4,p=0.0},{c=0xffffff,a=1,p=0.5},{c=0x000000,a=0.4,p=1}},lw=1,sub=1,db=0,subtab=subtab})
--######################################################################
subtab={
{d="start",x=5.5,y=265.5},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=2,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=1,p=0},{c=0x000000,a=1,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=5,y=265},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=80,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=0.2,p=0.0},{c=0xffffff,a=0.35,p=0.63},{c=0xffffff,a=0.35,p=0.65},{c=0xffffff,a=0.35,p=0.67},{c=0x000000,a=0.3,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=10,y=297},
{d="rline",x=180,y=0},
{d="rline",x=0,y=1.5},
{d="rline",x=-180,y=0},
}
grec({g=2,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=0.4,p=0.0},{c=0xffffff,a=1,p=0.5},{c=0x000000,a=0.4,p=1}},lw=1,sub=1,db=0,subtab=subtab})
--######################################################################
subtab={
{d="start",x=5.5,y=365.5},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=2,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=1,p=0},{c=0x000000,a=1,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=5,y=365},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=80,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=0.2,p=0.0},{c=0xffffff,a=0.35,p=0.59},{c=0xffffff,a=0.35,p=0.61},{c=0xffffff,a=0.35,p=0.63},{c=0x000000,a=0.3,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=10,y=397},
{d="rline",x=180,y=0},
{d="rline",x=0,y=1.5},
{d="rline",x=-180,y=0},
}
grec({g=2,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=0.4,p=0.0},{c=0xffffff,a=1,p=0.5},{c=0x000000,a=0.4,p=1}},lw=1,sub=1,db=0,subtab=subtab})
--######################################################################
subtab={
{d="start",x=5.5,y=465.5},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=2,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=1,p=0},{c=0x000000,a=1,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=5,y=465},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=80,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=0.2,p=0.0},{c=0xffffff,a=0.35,p=0.55},{c=0xffffff,a=0.35,p=0.57},{c=0xffffff,a=0.35,p=0.59},{c=0x000000,a=0.3,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=10,y=497},
{d="rline",x=180,y=0},
{d="rline",x=0,y=1.5},
{d="rline",x=-180,y=0},
}
grec({g=2,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=0.4,p=0.0},{c=0xffffff,a=1,p=0.5},{c=0x000000,a=0.4,p=1}},lw=1,sub=1,db=0,subtab=subtab})
--######################################################################
subtab={
{d="start",x=5.5,y=565.5},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=2,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=1,p=0},{c=0x000000,a=1,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=5,y=565},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=80,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=0.2,p=0.0},{c=0xffffff,a=0.35,p=0.51},{c=0xffffff,a=0.35,p=0.53},{c=0xffffff,a=0.35,p=0.55},{c=0x000000,a=0.3,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=10,y=597},
{d="rline",x=180,y=0},
{d="rline",x=0,y=1.5},
{d="rline",x=-180,y=0},
}
grec({g=2,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=0.4,p=0.0},{c=0xffffff,a=1,p=0.5},{c=0x000000,a=0.4,p=1}},lw=1,sub=1,db=0,subtab=subtab})
--######################################################################
subtab={
{d="start",x=5.5,y=665.5},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=2,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=1,p=0},{c=0x000000,a=1,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=5,y=665},
{d="arc_c",q=4,r=10,degs=90},
{d="rline",x=200,y=0},
{d="arc_c",q=1,r=10,degs=90},
{d="rline",x=0,y=70},
{d="arc_c",q=2,r=10,degs=90},
{d="rline",x=-200,y=0},
{d="arc_c",q=3,r=10,degs=90},
}
grec({g=5,gan=80,x=5,y=200,w=200,h=90,grad={{c=0x000000,a=0.2,p=0.0},{c=0xffffff,a=0.35,p=0.47},{c=0xffffff,a=0.35,p=0.49},{c=0xffffff,a=0.35,p=0.51},{c=0x000000,a=0.3,p=1}},lw=1,sub=1,db=0,subtab=subtab})
subtab={
{d="start",x=10,y=697},
{d="rline",x=180,y=0},
{d="rline",x=0,y=1.5},
{d="rline",x=-180,y=0},
}
grec({g=2,x=5,y=155,w=200,h=90,grad={{c=0x000000,a=0.4,p=0.0},{c=0xffffff,a=1,p=0.5},{c=0x000000,a=0.4,p=1}},lw=1,sub=1,db=0,subtab=subtab})
--Background setup end ##################################################
--#######################################################################
--Config start###########################################################
starty=15
gap=15
ypos=0
ypos=starty+ypos
out({c=0xACACAC,a=1,f="LaudatioC",fs=18,x=60,y=ypos+4,txt=conky_parse"${sysname}/debian"})
ypos=gap+ypos
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+6,txt=conky_parse"${kernel}"})
image({x=145,y=37,h=75,w=75,file="/home/falldown/images/vsido-logo-rev4.png"})
--data titles
ypos=gap+ypos
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+10,txt="uptime:"})
ypos=gap+ypos
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+50,txt="MEM:"})
ypos=gap+ypos
ypos=0
ypos=starty+gap+gap+ypos
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=65,y=ypos+10,txt=conky_parse"${uptime}"})
ypos=gap+ypos
--## MEM BARGRAPH #########################################################
num=tonumber(conky_parse("${memperc}"))
--num=100--hard code num to see gradient on full bar
local num_max=100
local bar_ht=12
local crd=0--corner rad
local tht=bar_ht+(2*crd)--total length
local bar_wd=202--length of flat bar top/bottom
local twd=bar_wd+(2*crd)
local tlx=15--top left corner x
local tly=103--top left corner y
local bar=(bar_wd/num_max)*num
--gradient indicator
subtab={
{d="start",x=tlx+crd,y=tly+tht},
{d="rline",x=0,y=bar_ht},
{d="rline",x=200,y=0},
{d="rline",x=0,y=-bar_ht},
}
grec({g=2,x=tlx,y=tly,w=bar+(2*crd),h=tht,grad={{c=0x000000,a=0,p=0},{c=0xffffff,a=1,p=0.94},{c=0xffffff,a=1,p=0.99},{c=0x000000,a=0,p=1}},sub=1,db=0,subtab=subtab})
--######################################################################
--MEM SECTION
ypos=gap+ypos
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=65,y=ypos+66,txt=conky_parse"${mem}/${memmax}"})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=65,y=ypos+35,txt=conky_parse"${memperc}%"})
ypos=gap+ypos
--CPU SECTION
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+80,txt="CPU1:"})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=130,y=ypos+80,txt="TEMP:"})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+132,txt="CPU2:"})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=130,y=ypos+132,txt="TEMP:"})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=170,y=ypos+80,txt=conky_parse"${hwmon 1 temp 2}°C"})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=50,y=ypos+80,txt=conky_parse"${cpu cpu1}%"})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=170,y=ypos+132,txt=conky_parse"${hwmon 1 temp 3}°C"})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=50,y=ypos+132,txt=conky_parse"${cpu cpu2}%"})
--CPU BARGRAPH ########################################################
num=tonumber(conky_parse("${cpu cpu1}"))
--num=100--hard code num to see gradient on full bar
local num_max=100
local bar_ht=12
local crd=0--corner rad
local tht=bar_ht+(2*crd)--total length
local bar_wd=202--length of flat bar top/bottom
local twd=bar_wd+(2*crd)
local tlx=15--top left corner x
local tly=163--top left corner y
local bar=(bar_wd/num_max)*num
--gradient indicator
subtab={
{d="start",x=tlx+crd,y=tly+tht},
{d="rline",x=0,y=bar_ht},
{d="rline",x=200,y=0},
{d="rline",x=0,y=-bar_ht},
}
grec({g=2,x=tlx,y=tly,w=bar+(2*crd),h=tht,grad={{c=0x000000,a=0,p=0},{c=0xffffff,a=1,p=0.94},{c=0xffffff,a=1,p=0.99},{c=0x000000,a=0,p=1}},sub=1,db=0,subtab=subtab})
num=tonumber(conky_parse("${cpu cpu2}"))
--num=100--hard code num to see gradient on full bar
local num_max=100
local bar_ht=12
local crd=0--corner rad
local tht=bar_ht+(2*crd)--total length
local bar_wd=202--length of flat bar top/bottom
local twd=bar_wd+(2*crd)
local tlx=15--top left corner x
local tly=215--top left corner y
local bar=(bar_wd/num_max)*num
--gradient indicator
subtab={
{d="start",x=tlx+crd,y=tly+tht},
{d="rline",x=0,y=bar_ht},
{d="rline",x=200,y=0},
{d="rline",x=0,y=-bar_ht},
}
grec({g=2,x=tlx,y=tly,w=bar+(2*crd),h=tht,grad={{c=0x000000,a=0,p=0},{c=0xffffff,a=1,p=0.94},{c=0xffffff,a=1,p=0.99},{c=0x000000,a=0,p=1}},sub=1,db=0,subtab=subtab})
--######################################################################
--Net SECTION
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+180,txt="NET UP:"})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+233,txt="NET DOWN:"})
--out({c=0xffffff,a=1,f="LaudatioC",fs=14,x=260,y=ypos+180,txt=conky_parse"${memperc}%"})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=60,y=ypos+180,txt=conky_parse"${upspeed}"})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=85,y=ypos+233,txt=conky_parse"${downspeed}"})
--NET BARGRAPH##########################################################
num=tonumber(conky_parse("${upspeedf}"))
--num=100--hard code num to see gradient on full bar
local num_max=100
local bar_ht=12
local crd=0--corner rad
local tht=bar_ht+(2*crd)--total length
local bar_wd=202--length of flat bar top/bottom
local twd=bar_wd+(2*crd)
local tlx=15--top left corner x
local tly=263--top left corner y
local bar=(bar_wd/num_max)*num
--gradient indicator
subtab={
{d="start",x=tlx+crd,y=tly+tht},
{d="rline",x=0,y=bar_ht},
{d="rline",x=200,y=0},
{d="rline",x=0,y=-bar_ht},
}
grec({g=2,x=tlx,y=tly,w=bar+(2*crd),h=tht,grad={{c=0x000000,a=0,p=0},{c=0xffffff,a=1,p=0.94},{c=0xffffff,a=1,p=0.99},{c=0x000000,a=0,p=1}},sub=1,db=0,subtab=subtab})
num=tonumber(conky_parse("${downspeedf}"))
--num=100--hard code num to see gradient on full bar
local num_max=100
local bar_ht=12
local crd=0--corner rad
local tht=bar_ht+(2*crd)--total length
local bar_wd=202--length of flat bar top/bottom
local twd=bar_wd+(2*crd)
local tlx=15--top left corner x
local tly=317--top left corner y
local bar=(bar_wd/num_max)*num
--gradient indicator
subtab={
{d="start",x=tlx+crd,y=tly+tht},
{d="rline",x=0,y=bar_ht},
{d="rline",x=200,y=0},
{d="rline",x=0,y=-bar_ht},
}
grec({g=2,x=tlx,y=tly,w=bar+(2*crd),h=tht,grad={{c=0x000000,a=0,p=0},{c=0xffffff,a=1,p=0.94},{c=0xffffff,a=1,p=0.99},{c=0x000000,a=0,p=1}},sub=1,db=0,subtab=subtab})
--######################################################################
--Last fm SECTION
image({x=45,y=655,h=48,w=125,file="/home/falldown/v9000/Lastfm/logo1.png"})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=75,y=ypos+620,txt="PLAYING"})
out({c=0xffffff,a=1,f="LaudatioC",fs=10,x=10,y=ypos+640,txt=conky_parse"${rss http://ws.audioscrobbler.com/1.0/user/chris-falldown/recenttracks.rss 1 item_titles 1 }"})
--######################################################################
--Time and Date SECTION
out({c=0xffffff,a=1,f="LaudatioC",fs=24,x=55,y=ypos+340,txt=conky_parse"${time %I:%M:%S}"})
out({c=0xACACAC,a=1,f="LaudatioC",fs=24,x=25,y=ypos+295,txt=conky_parse"${time %B %d %Y}"})
--######################################################################
--Weather SECTION
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=35,y=ypos+377,txt=weather_location})
image({x=170,y=475,h=50,w=50,file=now["weather_icon"]})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=10,y=ypos+390,txt="Conditions:"})
out({c=0xffffff,a=1,f="LaudatioC",fs=14,x=75,y=ypos+390,txt=now["conditions_short"]})
image({x=10,y=498,h=45,w=45,file=now["wind_icon"]})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=55,y=ypos+450,txt=now["wind_mph"]})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=30,y=ypos+405,txt="Temperature:"})
out({c=0xffffff,a=1,f="LaudatioC",fs=14,x=112,y=ypos+405,txt=now["temp"].."°F"})
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=65,y=ypos+420,txt="Feels Like:"})
out({c=0xffffff,a=1,f="LaudatioC",fs=14,x=130,y=ypos+421,txt=now["temp"].."°F"})
--out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=440,y=ypos-10,txt="Weather for "})
--######################################################################
--NEXT 3 HOUR SECTION
out({c=0xACACAC,a=1,f="LaudatioC",fs=12,x=60,y=567,txt="NEXT 3 HOURS"})
image({w=30,h=30,x=40,y=570,file=now["fc_hour1_wicon"]})--good
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=10,y=584,txt=now["fc_hour1_time"].." "..now["fc_hour1_ampm"]})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=10,y=595,txt=now["fc_hour1_temp"].."°F"})
image({w=30,h=30,x=115,y=570,file=now["fc_hour2_wicon"]})--good
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=85,y=584,txt=now["fc_hour2_time"].." "..now["fc_hour2_ampm"]})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=85,y=595,txt=now["fc_hour2_temp"].."°F"})
image({w=30,h=30,x=185,y=570,file=now["fc_hour3_wicon"]})--good
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=155,y=584,txt=now["fc_hour3_time"].." "..now["fc_hour3_ampm"]})
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=155,y=595,txt=now["fc_hour3_temp"].."°F"})
--ALERTS SECTION
--show alert icon
image({x=5,y=600,h=22,w=22,file=alert_icon})
--show number of alerts
out({x=24,y=618,fs=22,txt=alert_number})
--display alert information
display_alerts=2--set number of alerts to show,set 0 to show all
top_left_alert_x=40--set top left coordinates for entire alerts section
top_left_alert_y=615--^alerts will display in a single column
alert_gap=40--sets the gap between the TOP of one alert and the Top of the next alert
--#######################################################################################################################################
if alert_number==0 then noal=1 elseif alert_number~=0 and display_alerts>alert_number then noal=alert_number else noal=display_alerts end
for i=1,noal do--start of alerts display section. do not edit ###########################################################################
local tlx=top_left_alert_x--write output relative to tlx #################################
local tly=top_left_alert_y+((i-1)*alert_gap)--write output relative to tlx ###############
--########################################################################################
out({c=0xffffff,a=1,f="LaudatioC",fs=12,x=tlx,y=tly,txt=alert_type[i]})
out({c=0xffffff,a=1,f="LaudatioC",fs=10,x=tlx,y=tly+15,txt=alert_issued[i]})
--########################################################################################
end--of alert display section ############################################################
--########################################################################################
--#######################################################################
--END OF CODE ----END OF CODE ----END OF CODE ---
--#######################################################################
end--of function do not edit this line ##################################
--#######################################################################