*hides hand with six fingers*
LOL DIZZIE! Welcome buddy! With you on our team.......... oh man we're screwed!
LOL DIZZIE! Welcome buddy! With you on our team.......... oh man we're screwed!
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: TeoBigusGeekus on January 14, 2013, 10:10:41 PM
Teo's scripts suck!!!
sudo startx
luke@MSI-VSIDO:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Juniper XT [AMD Radeon HD 6000 Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Juniper HDMI Audio [Radeon HD 5700 Series]
02:07.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
geany /etc/fstab
blkid
luke@Asus-VSIDO:~$ sudo blkid
[sudo] password for luke:
/dev/sdf5: LABEL="External" UUID="530e27ef-3701-4eb0-8f5f-01102fd27eba" TYPE="ext4"
/dev/sde5: UUID="d556b421-6d67-45ae-8b3a-c360f09912ef" TYPE="ext4"
/dev/sda5: UUID="959eed61-477e-456c-aa3d-bf582957fb51" TYPE="ext4"
/dev/sdb1: LABEL="storage" UUID="0D78843743DFACE1" TYPE="ntfs"
/dev/sdd1: UUID="d5014b82-66e7-4dad-8787-e14aa1f79af2" TYPE="ext4"
/dev/sdd2: UUID="fd0b669f-cc60-4799-a342-a719249a8d57" TYPE="ext4"
/dev/sdd3: UUID="4d4296c2-0299-4d32-bc71-73bb4b7ea936" TYPE="swap"
/dev/sdc5: UUID="92981918-8ba7-47f8-8927-f8aca3e56ee9" TYPE="ext4"
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sde1 / ext4 relatime,errors=remount-ro 0 1
/dev/sdf5 /media/External ext4 defaults 0 0
/dev/sda5 /media/sda5 ext4 defaults 0 0
/dev/sdb5 /media/sdb5 ext4 defaults 0 0
/dev/sdc1 /media/storage ntfs-3g defaults,locale=en_US.UTF-8 0 0
/dev/sdd5 /media/sdd5 ext4 defaults 0 0
/dev/sde2 /home ext4 relatime 0 0
/dev/sde3 none swap sw 0 0
/dev/cdrom /media/cdrom udf,iso9660 user,noauto,exec,utf8 0 0
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
#Entry for /dev/sde1 :
UUID=d5014b82-66e7-4dad-8787-e14aa1f79af2 / ext4 relatime,errors=remount-ro 0 1
#Entry for /dev/sdf5 :
UUID=530e27ef-3701-4eb0-8f5f-01102fd27eba /media/External ext4 defaults 0 0
#Entry for /dev/sda5 :
UUID=959eed61-477e-456c-aa3d-bf582957fb51 /media/sda5 ext4 defaults 0 0
#Entry for /dev/sdb5 :
UUID=d556b421-6d67-45ae-8b3a-c360f09912ef /media/sdb5 ext4 defaults 0 0
#Entry for /dev/sdc1 :
UUID=0D78843743DFACE1 /media/storage ntfs-3g defaults,locale=en_US.UTF-8 0 0
#Entry for /dev/sdd5 :
UUID=92981918-8ba7-47f8-8927-f8aca3e56ee9 /media/sdd5 ext4 defaults 0 0
#Entry for /dev/sde2 :
UUID=fd0b669f-cc60-4799-a342-a719249a8d57 /home ext4 relatime 0 0
#Entry for /dev/sde3 :
UUID=4d4296c2-0299-4d32-bc71-73bb4b7ea936 none swap sw 0 0
/dev/cdrom /media/cdrom udf,iso9660 user,noauto,exec,utf8 0 0
luke@VSIDO-MSI:~$ sudo apt-get update
Hit http://liquorix.net sid InRelease
Ign http://mozilla.debian.net experimental InRelease
Hit http://ftp.us.debian.org sid InRelease
Hit http://ignorantguru.github.com unstable InRelease
Hit http://mozilla.debian.net experimental Release.gpg
Hit http://liquorix.net sid/main amd64 Packages
Hit http://mozilla.debian.net experimental Release
Hit http://ftp.us.debian.org experimental InRelease
Hit http://ignorantguru.github.com unstable/main amd64 Packages
Hit http://www.deb-multimedia.org sid InRelease
Hit http://mozilla.debian.net experimental/iceweasel-aurora amd64 Packages
Get:1 http://ftp.us.debian.org sid/main amd64 Packages [6,242 kB]
Hit http://ftp.spline.de unstable InRelease
Hit http://www.deb-multimedia.org sid/main amd64 Packages
Hit http://ftp.spline.de unstable/main amd64 Packages
Hit http://www.deb-multimedia.org sid/non-free amd64 Packages
Get:2 ftp://ftp.us.debian.org sid InRelease [228 kB]
Ign http://liquorix.net sid/main Translation-en_US
Ign http://liquorix.net sid/main Translation-en
Ign http://mozilla.debian.net experimental/iceweasel-aurora Translation-en_US
Ign http://mozilla.debian.net experimental/iceweasel-aurora Translation-en
Ign http://ignorantguru.github.com unstable/main Translation-en_US
Ign http://ignorantguru.github.com unstable/main Translation-en
Get:3 ftp://ftp.us.debian.org sid/main Sources/DiffIndex [7,876 B]
Ign http://ftp.spline.de unstable/main Translation-en_US
Ign http://ftp.spline.de unstable/main Translation-en
Hit ftp://ftp.us.debian.org sid/contrib Sources/DiffIndex
Hit ftp://ftp.us.debian.org sid/non-free Sources/DiffIndex
Get:4 ftp://ftp.us.debian.org sid/main Sources [6,451 kB]
Ign http://www.deb-multimedia.org sid/main Translation-en_US
Ign http://www.deb-multimedia.org sid/main Translation-en
Ign http://www.deb-multimedia.org sid/non-free Translation-en_US
Hit http://ftp.us.debian.org sid/contrib amd64 Packages/DiffIndex
Ign http://www.deb-multimedia.org sid/non-free Translation-en
Hit http://ftp.us.debian.org sid/non-free amd64 Packages/DiffIndex
Hit http://ftp.us.debian.org sid/contrib Translation-en/DiffIndex
Get:5 http://ftp.us.debian.org sid/main Translation-en [4,107 kB]
Hit http://ftp.us.debian.org sid/non-free Translation-en/DiffIndex
Hit http://ftp.us.debian.org experimental/main amd64 Packages/DiffIndex
Hit http://ftp.us.debian.org experimental/contrib amd64 Packages/DiffIndex
Hit http://ftp.us.debian.org experimental/non-free amd64 Packages/DiffIndex
Hit http://ftp.us.debian.org experimental/contrib Translation-en/DiffIndex
Hit http://ftp.us.debian.org experimental/main Translation-en/DiffIndex
Hit http://ftp.us.debian.org experimental/non-free Translation-en/DiffIndex
Hit http://ftp.us.debian.org experimental/non-free amd64 Packages
Fetched 17.0 MB in 24s (692 kB/s)
W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.us.debian.org_debian_dists_sid_main_binary-amd64_Packages Hash Sum mismatch
W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.us.debian.org_debian_dists_sid_main_i18n_Translation-en Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
background yes
update_interval 1
cpu_avg_samples 2
net_avg_samples 2
double_buffer yes
no_buffers yes
text_buffer_size 2048
gap_x 10
gap_y 0
minimum_size 285 800
#maximum_width 190
own_window yes
own_window_type conky
own_window_transparent yes
#own_window_argb_visual
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
border_inner_margin 0
border_outer_margin 0
alignment ml
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
temperature_unit fahrenheit
override_utf8_locale yes
use_xft yes
xftfont 6x10:size=8
xftalpha 0.5
uppercase no
default_color FFFFFF
color1 660000
color2 AAAAAA
color3 DDDDDD
color4 CC3333
## Lua ##
lua_load /home/luke/Conky/allcombined_2.lua
## lua funcions
## background ##################################################################
#${lua draw_bg {corner_radius,x_position,y_position,width,height,color,alpha,draw_type,line_width,outline_color,outline_alpha}}
#note for background: set width=0 - width will be conky window width, set height=0 - height will be conky window height
# draw_type: 1=fill, 2=outline(must specify line_width), 3=outline and fill (must specify line_width, outline_color and outline_alpha)
## gradient bars ###############################################################
#${lua gradbar {x_position,y_position,"conky_object",object_max_value,number_of_divisions,division_width,division_height,division_gap,bg_color,bg_alpha,start_color,start_alpha,mid_color,mid_alpha,end_color,end_alpha}}
## calendar ###############################################################
#${lua luacal {x_position,y_position,"title_font",title_fontsize,title_color,title_alpha,"dates_font",dates_fontsize,dates_color,dates_alpha,"highlight_font",highlight_fontsize,highlight_color,highlight_alpha,"spacer",colum_gap,title_gap,row_gap,start_day}
#note for calendar: start day... 0=sunday, 1=monday ... "spacer" can help align calendar with non fix width fonts
## textured background ###############################################################
#${lua tex_bg {corner_radius,x_position,y_position,width,height,"/path/to/texture.png"}}
## lua draw images ###############################################################
#${lua luaimage {x_position,y_position,width,height,"/path/to/image"}}
#note for images: set width=0 - width will be image width, set height=0 - height will be image height
## lua draw text ###############################################################
#${lua luatext {x_position,y_position,color,alpha,"font",fontsize,"justify"}}
#note for text: justify can be "r" = right, "c" = center, "l" = left
#${lua draw_bg {10,0,0,0,0,0x000000,0.3}}
TEXT
${goto 0}${color1}${font Pseudo APL:size=14,weight:bold}Motherboard ${goto 240}${hwmon temp 1}F
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}${execi 1000 cat /sys/class/dmi/id/board_vendor} ${execi 1000 cat /sys/class/dmi/id/board_name}
${lua gradbar {5,55,"${hwmon temp 1}",210,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 5}
${goto 0}${color1}${font Pseudo APL:size=14,weight:bold}CPU${goto 240}${platform coretemp.0 temp 2}F
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}${execi 1000 cat /proc/cpuinfo | grep 'model name' | sed -e 's/model name.*: //' | sort -u | cut -c1-60}
${lua gradbar {5,136,"${platform coretemp.0 temp 2}",220,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 5}
${goto 13}${color}${font Pseudo APL:size=11,weight:normal}CPU1 ${cpu cpu1}% CPU2 ${cpu cpu2}% CPU3 ${cpu cpu3} CPU4 ${cpu cpu4}%
${lua gradbar {5,190,"${cpu cpu1}",100,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 5}
${goto 0}${color1}${font Pseudo APL:size=14,weight:bold}Memory
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}Total:${execi 1000 free -tm | grep -i mem |gawk '{ print $2}'}MB - Used: $mem - Free: $memfree
${lua gradbar {5,271,"${memperc}",100,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 3}
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}Total:${execi 1000 free -tm | grep -i swap |gawk '{ print $2}'}MB - Used: $swap - Free: $swapfree
${lua gradbar {5,325,"${swapperc}",100,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 5}
${goto 0}${color1}${font Pseudo APL:size=14,weight:bold}Graphic Card${goto 240} ${hwmon 2 temp 1}F
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}ATI XT Mobility Radeon HD 5870 1GB GDDR5
${lua gradbar {5,400,"${hwmon 2 temp 1}",200,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 0}
${goto 0}${color1}${font Pseudo APL:size=14,weight:bold}Network
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}Intel Centrino Advanced-N + WiMAX 6250
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}SSID: ${wireless_essid wlan0} ${goto 240}Speed: ${wireless_bitrate wlan0}
${goto 5}Mode: ${wireless_mode wlan0} ${goto 240}Quality: ${wireless_link_qual_perc wlan0}%
${goto 5}Down: ${downspeed wlan0} ${goto 240}Up: ${upspeed wlan0}
${goto 5}Total Down: ${totaldown wlan0}${goto 240}Total Up: ${totalup wlan0}
$${voffset -5}
${goto 5}${downspeedgraph wlan0 25,160 FFFFFF 990000}${goto 240}${upspeedgraph wlan0 25,160 FFFFFF 990000}
${goto 0}${color1}${font Pseudo APL:size=14,weight:bold}Storage${goto 240}${hddtemp /dev/sda}F
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}500GB Seagate Momentus XT Hybrid @ 7200rpm
${goto 5}${color}${font Pseudo APL:size=11,weight:normal}/root${goto 240}${fs_size /}
${lua gradbar {5,656,"${fs_used_perc /}",100,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 8}${goto 5}${font Pseudo APL:size=11,weight:normal}${color}Used${goto 150}${fs_used /}
${goto 5}${font Pseudo APL:size=11,weight:normal}${color}Free${goto 150}${fs_free /}
${voffset 5}${goto 5}${color}${font Pseudo APL:size=11,weight:normal}/home${goto 240}${fs_size /home}
${lua gradbar {5,740,"${fs_used_perc /home}",100,150,1,17,1,0xFFFFFF,.1,0xFFFFFF,.5,0xFF3333,.85,0x990000,1}}
${voffset 8}${goto 5}${font Pseudo APL:size=11,weight:normal}${color}Used${goto 150}${fs_used /home}
${goto 5}${font Pseudo APL:size=11,weight:normal}${color}Free${goto 150}${fs_free /home}
# -- Conky settings -- #
#background no
update_interval 1
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
double_buffer yes
no_buffers yes
text_buffer_size 2048
imlib_cache_size 0
# -- Window specifications -- #
own_window_class Conky
own_window yes
own_window_type desktop
own_window_argb_visual yes
own_window_argb_value 180
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
border_inner_margin 0
border_outer_margin 0
minimum_size 350 300
maximum_width 350
alignment tr
gap_x 10
gap_y 10
# -- Graphics settings -- #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# -- Text settings -- #
use_xft yes
xftfont Ubuntu:size=9
xftalpha 1
uppercase no
default_color FFFFFF
# -- Lua Load -- #
lua_load ~/Conky/rings.lua
lua_draw_hook_pre clock_rings
lua_load ~/Conky/marks.lua
lua_draw_hook_post main
TEXT
${image ~/images/orb_red.png -s 150x150 -p 130,80}
${font Pseudo APL:size=13}${texeci 500 bash $HOME/Accuweather_Conky_USA_Images/acc_usa_images}${image $HOME/Accuweather_Conky_USA_Images/cc.png -p -15,290 -s 210x128}
${font Pseudo APL:size=13}${goto 165}TEMP${alignr 3}${execpi 600 sed -n '4p' $HOME/Accuweather_Conky_USA_Images/curr_cond}°F (${execpi 600 sed -n '5p' $HOME/Accuweather_Conky_USA_Images/curr_cond}°F)
${goto 165}WIND${alignr 3}${execpi 600 sed -n '6p' $HOME/Accuweather_Conky_USA_Images/curr_cond} ${execpi 600 sed -n '14p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${goto 165}HUM${alignr 3}${execpi 600 sed -n '7p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${goto 200}PRESS${alignr 3}${execpi 600 sed -n '8p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${goto 200}CLOUD COVER${alignr 3}${execpi 600 sed -n '9p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${goto 200}UV INDEX${alignr 10}${execpi 600 sed -n '10p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${goto 165}DEW POINT${alignr 3}${execpi 600 sed -n '11p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${goto 200}CEILING${alignr 3}${execpi 600 sed -n '12p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${goto 200}VISIB.${alignr 3}${execpi 600 sed -n '13p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${goto 165}SUNRISE${alignr 3}${execpi 600 sed -n '15p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${goto 165}SUNSET${alignr 3}${execpi 600 sed -n '16p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
#${font WhiteRabbit:size=15}Current Weather ${alignr 3}${execpi 600 sed -n '3p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${font Pseudo APL:size=13}${goto 20}${execpi 600 sed -n '6p' $HOME/Accuweather_Conky_USA_Images/tod_ton}${goto 140}${execpi 600 sed -n '11p' $HOME/Accuweather_Conky_USA_Images/tod_ton}${goto 255}${execpi 600 sed -n '16p' $HOME/Accuweather_Conky_USA_Images/tod_ton}
${voffset -12}${font Pseudo APL:size=10}${goto 100}${execpi 600 sed -n '9p' $HOME/Accuweather_Conky_USA_Images/tod_ton}°F${goto 210}${execpi 600 sed -n '14p' $HOME/Accuweather_Conky_USA_Images/tod_ton}°F${goto 330}${execpi 600 sed -n '19p' $HOME/Accuweather_Conky_USA_Images/tod_ton}°F
${font Pseudo APL:size=10}${goto 100}${execpi 600 sed -n '10p' $HOME/Accuweather_Conky_USA_Images/tod_ton}°F${goto 210}${execpi 600 sed -n '15p' $HOME/Accuweather_Conky_USA_Images/tod_ton}°F${goto 330}${execpi 600 sed -n '20p' $HOME/Accuweather_Conky_USA_Images/tod_ton}°F${image $HOME/Accuweather_Conky_USA_Images/7.png -p 10,430 -s 95x57}${image $HOME/Accuweather_Conky_USA_Images/12.png -p 125,430 -s 95x57}${image $HOME/Accuweather_Conky_USA_Images/17.png -p 250,430 -s 95x57}
--==============================================================================
-- multi_rings.lua
--
-- author : SLK
-- version : v2011011601
-- license : Distributed under the terms of GNU GPL version 2 or later
--
--==============================================================================
require 'cairo'
--------------------------------------------------------------------------------
-- clock DATA
-- HOURS
clock_h = {
{
name='time', arg='%H', max_value=12,
x=200, y=150,
graph_radius=140,
graph_thickness=3,
graph_unit_angle=30, graph_unit_thickness=5,
graph_bg_colour=0xffffff, graph_bg_alpha=0.0,
graph_fg_colour=0xFFFFFF, graph_fg_alpha=0.0,
txt_radius=100,
txt_weight=1, txt_size=10.0,
txt_fg_colour=0xFFFFFF, txt_fg_alpha=0,
graduation_radius=120,
graduation_thickness=10, graduation_mark_thickness=1,
graduation_unit_angle=30,
graduation_fg_colour=0xFFFFFF, graduation_fg_alpha=1,
},
}
-------------------------------------------------------------------------------
-- rgb_to_r_g_b
-- converts color in hexa to decimal
--
function rgb_to_r_g_b(colour, alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
-------------------------------------------------------------------------------
-- angle_to_position
-- convert degree to rad and rotate (0 degree is top/north)
--
function angle_to_position(start_angle, current_angle)
local pos = current_angle + start_angle
return ( ( pos * (2 * math.pi / 360) ) - (math.pi / 2) )
end
-------------------------------------------------------------------------------
-- draw_clock_ring
-- displays clock
--
function draw_clock_ring(display, data, value)
local max_value = data['max_value']
local x, y = data['x'], data['y']
local graph_radius = data['graph_radius']
local graph_thickness, graph_unit_thickness = data['graph_thickness'], data['graph_unit_thickness']
local graph_unit_angle = data['graph_unit_angle']
local graph_bg_colour, graph_bg_alpha = data['graph_bg_colour'], data['graph_bg_alpha']
local graph_fg_colour, graph_fg_alpha = data['graph_fg_colour'], data['graph_fg_alpha']
-- background ring
cairo_arc(display, x, y, graph_radius, 0, 2 * math.pi)
cairo_set_source_rgba(display, rgb_to_r_g_b(graph_bg_colour, graph_bg_alpha))
cairo_set_line_width(display, graph_thickness)
cairo_stroke(display)
-- arc of value
local val = (value % max_value)
local i = 1
while i <= val do
cairo_arc(display, x, y, graph_radius,( ((graph_unit_angle * i) - graph_unit_thickness)*(2*math.pi/360) )-(math.pi/2),((graph_unit_angle * i) * (2*math.pi/360))-(math.pi/2))
cairo_set_source_rgba(display,rgb_to_r_g_b(graph_fg_colour,graph_fg_alpha))
cairo_stroke(display)
i = i + 1
end
local angle = (graph_unit_angle * i) - graph_unit_thickness
-- graduations marks
local graduation_radius = data['graduation_radius']
local graduation_thickness, graduation_mark_thickness = data['graduation_thickness'], data['graduation_mark_thickness']
local graduation_unit_angle = data['graduation_unit_angle']
local graduation_fg_colour, graduation_fg_alpha = data['graduation_fg_colour'], data['graduation_fg_alpha']
if graduation_radius > 0 and graduation_thickness > 0 and graduation_unit_angle > 0 then
local nb_graduation = 360 / graduation_unit_angle
local i = 1
while i <= nb_graduation do
cairo_set_line_width(display, graduation_thickness)
cairo_arc(display, x, y, graduation_radius, (((graduation_unit_angle * i)-(graduation_mark_thickness/2))*(2*math.pi/360))-(math.pi/2),(((graduation_unit_angle * i)+(graduation_mark_thickness/2))*(2*math.pi/360))-(math.pi/2))
cairo_set_source_rgba(display,rgb_to_r_g_b(graduation_fg_colour,graduation_fg_alpha))
cairo_stroke(display)
cairo_set_line_width(display, graph_thickness)
i = i + 1
end
end
-- text
local txt_radius = data['txt_radius']
local txt_weight, txt_size = data['txt_weight'], data['txt_size']
local txt_fg_colour, txt_fg_alpha = data['txt_fg_colour'], data['txt_fg_alpha']
local movex = txt_radius * (math.cos((angle * 2 * math.pi / 360)-(math.pi/2)))
local movey = txt_radius * (math.sin((angle * 2 * math.pi / 360)-(math.pi/2)))
cairo_select_font_face (display, "ubuntu", CAIRO_FONT_SLANT_NORMAL, txt_weight);
cairo_set_font_size (display, txt_size);
cairo_set_source_rgba (display, rgb_to_r_g_b(txt_fg_colour, txt_fg_alpha));
cairo_move_to (display, x + movex - (txt_size / 2), y + movey + 3);
cairo_show_text (display, value);
cairo_stroke (display);
end
-------------------------------------------------------------------------------
-- draw_gauge_ring
-- displays gauges
--
function draw_gauge_ring(display, data, value)
local max_value = data['max_value']
local x, y = data['x'], data['y']
local graph_radius = data['graph_radius']
local graph_thickness, graph_unit_thickness = data['graph_thickness'], data['graph_unit_thickness']
local graph_start_angle = data['graph_start_angle']
local graph_unit_angle = data['graph_unit_angle']
local graph_bg_colour, graph_bg_alpha = data['graph_bg_colour'], data['graph_bg_alpha']
local graph_fg_colour, graph_fg_alpha = data['graph_fg_colour'], data['graph_fg_alpha']
local hand_fg_colour, hand_fg_alpha = data['hand_fg_colour'], data['hand_fg_alpha']
local graph_end_angle = (max_value * graph_unit_angle) % 360
-- background ring
cairo_arc(display, x, y, graph_radius, angle_to_position(graph_start_angle, 0), angle_to_position(graph_start_angle, graph_end_angle))
cairo_set_source_rgba(display, rgb_to_r_g_b(graph_bg_colour, graph_bg_alpha))
cairo_set_line_width(display, graph_thickness)
cairo_stroke(display)
-- arc of value
local val = value % (max_value + 1)
local start_arc = 0
local stop_arc = 0
local i = 1
while i <= val do
start_arc = (graph_unit_angle * i) - graph_unit_thickness
stop_arc = (graph_unit_angle * i)
cairo_arc(display, x, y, graph_radius, angle_to_position(graph_start_angle, start_arc), angle_to_position(graph_start_angle, stop_arc))
cairo_set_source_rgba(display, rgb_to_r_g_b(graph_fg_colour, graph_fg_alpha))
cairo_stroke(display)
i = i + 1
end
local angle = start_arc
-- hand
start_arc = (graph_unit_angle * val) - (graph_unit_thickness * 2)
stop_arc = (graph_unit_angle * val)
cairo_arc(display, x, y, graph_radius, angle_to_position(graph_start_angle, start_arc), angle_to_position(graph_start_angle, stop_arc))
cairo_set_source_rgba(display, rgb_to_r_g_b(hand_fg_colour, hand_fg_alpha))
cairo_stroke(display)
-- graduations marks
local graduation_radius = data['graduation_radius']
local graduation_thickness, graduation_mark_thickness = data['graduation_thickness'], data['graduation_mark_thickness']
local graduation_unit_angle = data['graduation_unit_angle']
local graduation_fg_colour, graduation_fg_alpha = data['graduation_fg_colour'], data['graduation_fg_alpha']
if graduation_radius > 0 and graduation_thickness > 0 and graduation_unit_angle > 0 then
local nb_graduation = graph_end_angle / graduation_unit_angle
local i = 0
while i < nb_graduation do
cairo_set_line_width(display, graduation_thickness)
start_arc = (graduation_unit_angle * i) - (graduation_mark_thickness / 2)
stop_arc = (graduation_unit_angle * i) + (graduation_mark_thickness / 2)
cairo_arc(display, x, y, graduation_radius, angle_to_position(graph_start_angle, start_arc), angle_to_position(graph_start_angle, stop_arc))
cairo_set_source_rgba(display,rgb_to_r_g_b(graduation_fg_colour,graduation_fg_alpha))
cairo_stroke(display)
cairo_set_line_width(display, graph_thickness)
i = i + 1
end
end
-- text
local txt_radius = data['txt_radius']
local txt_weight, txt_size = data['txt_weight'], data['txt_size']
local txt_fg_colour, txt_fg_alpha = data['txt_fg_colour'], data['txt_fg_alpha']
local movex = txt_radius * math.cos(angle_to_position(graph_start_angle, angle))
local movey = txt_radius * math.sin(angle_to_position(graph_start_angle, angle))
cairo_select_font_face (display, "ubuntu", CAIRO_FONT_SLANT_NORMAL, txt_weight)
cairo_set_font_size (display, txt_size)
cairo_set_source_rgba (display, rgb_to_r_g_b(txt_fg_colour, txt_fg_alpha))
cairo_move_to (display, x + movex - (txt_size / 2), y + movey + 3)
cairo_show_text (display, value)
cairo_stroke (display)
-- caption
local caption = data['caption']
local caption_weight, caption_size = data['caption_weight'], data['caption_size']
local caption_fg_colour, caption_fg_alpha = data['caption_fg_colour'], data['caption_fg_alpha']
local tox = graph_radius * (math.cos((graph_start_angle * 2 * math.pi / 360)-(math.pi/2)))
local toy = graph_radius * (math.sin((graph_start_angle * 2 * math.pi / 360)-(math.pi/2)))
cairo_select_font_face (display, "ubuntu", CAIRO_FONT_SLANT_NORMAL, caption_weight);
cairo_set_font_size (display, caption_size)
cairo_set_source_rgba (display, rgb_to_r_g_b(caption_fg_colour, caption_fg_alpha))
cairo_move_to (display, x + tox + 5, y + toy + 1)
-- bad hack but not enough time !
if graph_start_angle < 105 then
cairo_move_to (display, x + tox - 30, y + toy + 1)
end
cairo_show_text (display, caption)
cairo_stroke (display)
end
-------------------------------------------------------------------------------
-- go_clock_rings
-- loads data and displays clock
--
function go_clock_rings(display)
local function load_clock_rings(display, data)
local str, value = '', 0
str = string.format('${%s %s}',data['name'], data['arg'])
str = conky_parse(str)
value = tonumber(str)
draw_clock_ring(display, data, value)
end
for i in pairs(clock_h) do
load_clock_rings(display, clock_h[i])
end
end
-------------------------------------------------------------------------------
-- go_gauge_rings
-- loads data and displays gauges
--
function go_gauge_rings(display)
local function load_gauge_rings(display, data)
local str, value = '', 0
str = string.format('${%s %s}',data['name'], data['arg'])
str = conky_parse(str)
value = tonumber(str)
draw_gauge_ring(display, data, value)
end
end
-------------------------------------------------------------------------------
-- MAIN
function conky_main()
if conky_window == nil then
return
end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local display = cairo_create(cs)
local updates = conky_parse('${updates}')
update_num = tonumber(updates)
if update_num > 5 then
go_clock_rings(display)
go_gauge_rings(display)
end
end
--[[
Clock Rings by londonali1010 (2009)
This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.
IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement near the end of the script uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num > 5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num > 3; conversely if you update Conky every 0.5s, you should use update_num > 10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/clock_rings-v1.1.1.lua
lua_draw_hook_pre clock_rings
Changelog:
+ v1.1.1 -- Fixed minor bug that caused the script to crash if conky_parse() returns a nil value (20.10.2009)
+ v1.1 -- Added colour option for clock hands (07.10.2009)
+ v1.0 -- Original release (30.09.2009)
]]
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xFFFFFF,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0xFFFFFF,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=175, y=175,
-- "radius" is the radius of the ring.
radius=50,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=5,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='time',
arg='%M.%S',
max=60,
bg_colour=0xFFFFFF,
bg_alpha=0,
fg_colour=0xFFFFFF,
fg_alpha=0,
x=175, y=175,
radius=56,
thickness=5,
start_angle=0,
end_angle=360
},
{
name='time',
arg='%S',
max=60,
bg_colour=0xFFFFFF,
bg_alpha=0,
fg_colour=0xFFFFFF,
fg_alpha=0,
x=175, y=175,
radius=62,
thickness=5,
start_angle=0,
end_angle=360
},
}
-- Use these settings to define the origin and extent of your clock.
clock_r=125
-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
clock_x=200
clock_y=150
-- Colour & alpha of the clock hands
clock_colour=0xFFFFFF
clock_alpha=1
-- Do you want to show the seconds hand?
show_seconds=true
require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
-- Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
-- Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys
secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")
secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12
-- Draw hour hand
xh=xc+0.7*clock_r*math.sin(hours_arc)
yh=yc-0.7*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,rgb_to_r_g_b(clock_colour,clock_alpha))
cairo_stroke(cr)
-- Draw minute hand
xm=xc+clock_r*math.sin(mins_arc)
ym=yc-clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)
cairo_set_line_width(cr,3)
cairo_stroke(cr)
-- Draw seconds hand
if show_seconds then
xs=xc+clock_r*math.sin(secs_arc)
ys=yc-clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)
cairo_set_line_width(cr,1)
cairo_stroke(cr)
end
end
function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
if value == nil then value = 0 end
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
-- Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
draw_clock_hands(cr,clock_x,clock_y)
end
--[[ by mrpeachy -
combines background bar and calendar functions
]]
require 'cairo'
require 'imlib2'
function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end
function conky_gradbar(bartab)
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)
local updates=tonumber(conky_parse('${updates}'))
if updates>5 then
--#########################################################################################################
--convert to table
local bartab=loadstring("return" .. bartab)()
local bar_startx=bartab[1]
local bar_starty=bartab[2]
local number=bartab[3]
local number=conky_parse(number)
local number_max=bartab[4]
local divisions=bartab[5]
local div_width=bartab[6]
local div_height=bartab[7]
local div_gap=bartab[8]
local bg_col=bartab[9]
local bg_alpha=bartab[10]
local st_col=bartab[11]
local st_alpha=bartab[12]
local mid_col=bartab[13]
local mid_alpha=bartab[14]
local end_col=bartab[15]
local end_alpha=bartab[16]
--color conversion
local br,bg,bb,ba=rgb_to_r_g_b({bg_col,bg_alpha})
local sr,sg,sb,sa=rgb_to_r_g_b({st_col,st_alpha})
local mr,mg,mb,ma=rgb_to_r_g_b({mid_col,mid_alpha})
local er,eg,eb,ea=rgb_to_r_g_b({end_col,end_alpha})
if number==nil then number=0 end
local number_divs=(number/number_max)*divisions
cairo_set_line_width (cr,div_width)
--gradient calculations
for i=1,divisions do
if i<(divisions/2) and i<=number_divs then
colr=((mr-sr)*(i/(divisions/2)))+sr
colg=((mg-sg)*(i/(divisions/2)))+sg
colb=((mb-sb)*(i/(divisions/2)))+sb
cola=((ma-sa)*(i/(divisions/2)))+sa
elseif i>=(divisions/2) and i<=number_divs then
colr=((er-mr)*((i-(divisions/2))/(divisions/2)))+mr
colg=((eg-mg)*((i-(divisions/2))/(divisions/2)))+mg
colb=((eb-mb)*((i-(divisions/2))/(divisions/2)))+mb
cola=((ea-ma)*((i-(divisions/2))/(divisions/2)))+ma
else
colr=br
colg=bg
colb=bb
cola=ba
end
cairo_set_source_rgba (cr,colr,colg,colb,cola)
cairo_move_to (cr,bar_startx+((div_width+div_gap)*i-1),bar_starty)
cairo_rel_line_to (cr,0,div_height)
cairo_stroke (cr)
end
--#########################################################################################################
end-- if updates>5
bartab=nil
colr=nil
colg=nil
colb=nil
cola=nil
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
return ""
end-- end main function
function conky_draw_bg(bgtab)
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)
--#########################################################################################################
--convert to table
local bgtab=loadstring("return" .. bgtab)()
local r=bgtab[1]
local x=bgtab[2]
local y=bgtab[3]
local w=bgtab[4]
local h=bgtab[5]
local color=bgtab[6]
local alpha=bgtab[7]
if w==0 then
w=tonumber(conky_window.width)
end
if h==0 then
h=tonumber(conky_window.height)
end
cairo_set_source_rgba (cr,rgb_to_r_g_b({color,alpha}))
--top left mid circle
local xtl=x+r
local ytl=y+r
--top right mid circle
local xtr=(x+r)+((w)-(2*r))
local ytr=y+r
--bottom right mid circle
local xbr=(x+r)+((w)-(2*r))
local ybr=(y+r)+((h)-(2*r))
--bottom right mid circle
local xbl=(x+r)
local ybl=(y+r)+((h)-(2*r))
--the drawing part---------------------------
cairo_move_to (cr,xtl,ytl-r)
cairo_line_to (cr,xtr,ytr-r)
cairo_arc(cr,xtr,ytr,r,((2*math.pi/4)*3),((2*math.pi/4)*4))
cairo_line_to (cr,xbr+r,ybr)
cairo_arc(cr,xbr,ybr,r,((2*math.pi/4)*4),((2*math.pi/4)*1))
cairo_line_to (cr,xbl,ybl+r)
cairo_arc(cr,xbl,ybl,r,((2*math.pi/4)*1),((2*math.pi/4)*2))
cairo_line_to (cr,xtl-r,ytl)
cairo_arc(cr,xtl,ytl,r,((2*math.pi/4)*2),((2*math.pi/4)*3))
cairo_close_path(cr)
cairo_fill (cr)
--#########################################################################################################
bgtab=nil
w=nil
h=nil
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
return ""
end-- end main function
function conky_luacal(caltab)
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)
--####################################################################################################
local caltab=loadstring("return" .. caltab)()
local cal_x=caltab[1]
local cal_y=caltab[2]
local tfont=caltab[3]
local tfontsize=caltab[4]
local tc=caltab[5]
local ta=caltab[6]
local bfont=caltab[7]
local bfontsize=caltab[8]
local bc=caltab[9]
local ba=caltab[10]
local hfont=caltab[11]
local hfontsize=caltab[12]
local hc=caltab[13]
local ha=caltab[14]
local spacer=caltab[15]
local gaph=caltab[16]
local gapt=caltab[17]
local gapl=caltab[18]
local sday=caltab[19]
--convert colors
--local font=string.gsub(font,"_"," ")
local tred,tgreen,tblue,talpha=rgb_to_r_g_b({tc,ta})
--main body text color
local bred,bgreen,bblue,balpha=rgb_to_r_g_b({bc,ba})
--highlight text color
local hred,hgreen,hblue,halpha=rgb_to_r_g_b({hc,ha})
--###################################################
--calendar calcs
local year=os.date("%G")
local today=tonumber(os.date("%d"))
local t1 = os.time( { year=year,month=03,day=01,hour=00,min=0,sec=0} );
local t2 = os.time( { year=year,month=02,day=01,hour=00,min=0,sec=0} );
local feb=(os.difftime(t1,t2))/(24*60*60)
local monthdays={ 31, feb, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }
local day=tonumber(os.date("%w"))+1-sday
local day_num = today
local remainder=day_num % 7
local start_day=day-(day_num % 7)
if start_day<0 then start_day=7+start_day end
local month=os.date("%m")
local mdays=monthdays[tonumber(month)]
local x=mdays+start_day
local dnum={}
local dnumh={}
if mdays+start_day<36 then
dlen=35
plen=29
else
dlen=42
plen=36
end
for i=1,dlen do
if i<=start_day then
dnum[i]=" "
else
dn=i-start_day
if dn=="nil" then dn=0 end
if dn<=9 then dn=(spacer .. dn) end
if i>x then dn="" end
dnum[i]=dn
dnumh[i]=dn
if dn==(spacer .. today) or dn==today then
dnum[i]=""
end
if dn==(spacer .. today) or dn==today then
dnumh[i]=dn
place=i
else dnumh[i]=" "
end
end
end--for
cairo_select_font_face (cr, tfont, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, tfontsize);
cairo_set_source_rgba (cr,tred,tgreen,tblue,talpha)
if tonumber(sday)==0 then
dys={"SU","MO","TU","WE","TH","FR","SA"}
else
dys={"MO","TU","WE","TH","FR","SA","SU"}
end
--draw calendar titles
for i=1,7 do
cairo_move_to (cr, cal_x+(gaph*(i-1)), cal_y)
cairo_show_text (cr, dys[i])
cairo_stroke (cr)
end
--draw calendar body
cairo_select_font_face (cr, bfont, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, bfontsize);
cairo_set_source_rgba (cr,bred,bgreen,bblue,balpha)
for i=1,plen,7 do
local fn=i
for i=fn,fn+6 do
cairo_move_to (cr, cal_x+(gaph*(i-fn)),cal_y+gapt+(gapl*((fn-1)/7)))
cairo_show_text (cr, dnum[i])
cairo_stroke (cr)
end
end
--highlight
cairo_select_font_face (cr, hfont, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, hfontsize);
cairo_set_source_rgba (cr,hred,hgreen,hblue,halpha)
for i=1,plen,7 do
local fn=i
for i=fn,fn+6 do
cairo_move_to (cr, cal_x+(gaph*(i-fn)),cal_y+gapt+(gapl*((fn-1)/7)))
cairo_show_text (cr, dnumh[i])
cairo_stroke (cr)
end
end
--#########################################################################################################
caltab=nil
dlen=nil
plen=nil
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
return ""
end-- end main function
function conky_luaimage(imtab)
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)
--#########################################################################################################
local imtab=loadstring("return" .. imtab)()
local im_x=imtab[1]
local im_y=imtab[2]
local im_w=imtab[3]
local im_h=imtab[4]
local file=imtab[5]
local show = imlib_load_image(file)
if show == nil then return end
imlib_context_set_image(show)
if tonumber(im_w)==0 then
width=imlib_image_get_width()
else
width=tonumber(im_w)
end
if tonumber(im_h)==0 then
height=imlib_image_get_height()
else
height=tonumber(im_h)
end
imlib_context_set_image(show)
local scaled=imlib_create_cropped_scaled_image(0, 0, imlib_image_get_width(), imlib_image_get_height(), width, height)
imlib_free_image()
imlib_context_set_image(scaled)
imlib_render_image_on_drawable(im_x, im_y)
imlib_free_image()
show=nil
--#########################################################################################################
imtab=nil
height=nil
width=nil
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
return ""
end-- end main function
function conky_tex_bg(textab)
local textab=loadstring("return" .. textab)()
local tex_file=textab[6]
local surface = cairo_image_surface_create_from_png(tostring(tex_file))
local cw,ch = conky_window.width, conky_window.height
local cs=cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, cw,ch)
local cr=cairo_create(cs)
--#########################################################################################################
--convert to table
local r=textab[1]
local x=textab[2]
local y=textab[3]
local w=textab[4]
local h=textab[5]
if w=="0" then
w=cw
end
if h=="0" then
h=ch
end
--top left mid circle
local xtl=x+r
local ytl=y+r
--top right mid circle
local xtr=(x+r)+((w)-(2*r))
local ytr=y+r
--bottom right mid circle
local xbr=(x+r)+((w)-(2*r))
local ybr=(y+r)+((h)-(2*r))
--bottom right mid circle
local xbl=(x+r)
local ybl=(y+r)+((h)-(2*r))
--the drawing part---------------------------
cairo_move_to (cr,xtl,ytl-r)
cairo_line_to (cr,xtr,ytr-r)
cairo_arc(cr,xtr,ytr,r,((2*math.pi/4)*3),((2*math.pi/4)*4))
cairo_line_to (cr,xbr+r,ybr)
cairo_arc(cr,xbr,ybr,r,((2*math.pi/4)*4),((2*math.pi/4)*1))
cairo_line_to (cr,xbl,ybl+r)
cairo_arc(cr,xbl,ybl,r,((2*math.pi/4)*1),((2*math.pi/4)*2))
cairo_line_to (cr,xtl-r,ytl)
cairo_arc(cr,xtl,ytl,r,((2*math.pi/4)*2),((2*math.pi/4)*3))
cairo_close_path(cr)
cairo_clip (cr)
cairo_new_path (cr);
--image part
cairo_set_source_surface (cr, surface, 0, 0)
cairo_paint (cr)
--#########################################################################################################
textab=nil
w=nil
h=nil
cairo_destroy(cr)
cairo_surface_destroy (cs)
cairo_surface_destroy (surface)
cr=nil
return ""
end-- end main function
function conky_luatext(txttab)--x,y,c,a,f,fs,txt,j ##################################################
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)
--#########################################################################################################
--convert to table
local txttab=loadstring("return" .. txttab)()
local x=txttab[1]
local y=txttab[2]
local c=txttab[3]
local a=txttab[4]
local f=txttab[5]
local fs=txttab[6]
local j=txttab[7]
local txt=txttab[8]
cairo_select_font_face (cr, f, CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
cairo_set_font_size (cr, fs)
local extents=cairo_text_extents_t:create()
cairo_text_extents(cr,txt,extents)
local wx=extents.x_advance
cairo_set_source_rgba (cr,rgb_to_r_g_b({c,a}))
if j=="l" then
cairo_move_to (cr,x,y)
elseif j=="c" then
cairo_move_to (cr,x-(wx/2),y)
elseif j=="r" then
cairo_move_to (cr,x-wx,y)
end
cairo_show_text (cr,txt)
cairo_stroke (cr)
--#########################################################################################################
txttab=nil
cairo_destroy(cr)
cairo_surface_destroy (cs)
cr=nil
return ""
end-- end main function
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager
#own_window_colour white
own_window_class Conky
own_window_title Chronograph TEST
double_buffer yes
### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type normal
#own_window_argb_visual yes
### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 5
minimum_size 270 260 ## width, height
maximum_width 270 ## width
gap_x 20
gap_y 20
# tl, tm, tr
# ml, mm, mr
# bl, bm, br
alignment tl
#alignment top_left
# Use Xft (anti-aliased font and stuff)
use_xft yes
#xftfont CorporateMonoExtraBold:size=9
xftfont monofur:bold:size=14
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes
uppercase no
draw_shades no
default_shade_color black
draw_outline no # amplifies text if yes
default_outline_color black
color1 000000 ## Black
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 0
# graph borders
draw_graph_borders yes #no
#default_graph_size 15 40
background yes
use_spacer none
text_buffer_size 256
no_buffers yes
short_units yes
# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
pad_percents 2
format_human_readable yes
short_units yes
update_interval 1
imlib_cache_size 0
# Maximum size of user text buffer, i.e. layout below TEXT line in config file
# (default is 16384 bytes)
# max_user_text 16384
# Desired output unit of all objects displaying a temperature. Parameters are
# either "fahrenheit" or "celsius". The default unit is degree Celsius.
temperature_unit Fahrenheit
####### Load Lua #########
lua_load ~/Conky/s11_clock.lua
lua_draw_hook_pre main
#lua_load ~/Conky/rings.lua
#lua_draw_hook_pre main_rings
############################## End LUA ###
TEXT
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager
own_window_colour red
own_window_class Conky
own_window_title Chronograph TEST
double_buffer yes
### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type normal
#own_window_argb_visual yes
### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 5
minimum_size 530 300 ## width, height
maximum_width 530 ## width
gap_x 10
gap_y 150
# tl, tm, tr
# ml, mm, mr
# bl, bm, br
alignment bl
#alignment top_left
# Use Xft (anti-aliased font and stuff)
use_xft yes
#xftfont CorporateMonoExtraBold:size=9
xftfont WhiteRabbit:bold:size=20
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes
uppercase no
draw_shades no
default_shade_color black
draw_outline no # amplifies text if yes
default_outline_color black
color1 000000 ## Black
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 0
# graph borders
draw_graph_borders yes #no
#default_graph_size 15 40
background yes
use_spacer none
text_buffer_size 256
no_buffers yes
short_units yes
# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
pad_percents 2
format_human_readable yes
short_units yes
update_interval 1
imlib_cache_size 0
# Maximum size of user text buffer, i.e. layout below TEXT line in config file
# (default is 16384 bytes)
# max_user_text 16384
# Desired output unit of all objects displaying a temperature. Parameters are
# either "fahrenheit" or "celsius". The default unit is degree Celsius.
temperature_unit Fahrenheit
####### Load Lua #########
##load script
lua_load ~/Conky/mounted.lua
lua_load ~/Conky/allcombined_2.lua
## first lua command below text:
## ${lua get_mounted_data interval}, where interval is a number. This starts data gathering
## to get output:
## ${lua mount partition_number data_type text_length}, where partition number is a number
## text_length is optional, lets you specify the max number of characters the function returns. only affects fsys and mount data options
## data_type can be
## total - shows total number of partitions mounted, requires a partition_number also, use 1, could be used in an if_match
## fsys - shows filesystem
## size - shows space used in appropriate units
## free - shows free space in appropriate units
## use% - shows % used
## mount - shows mountpoint
############################## End LUA ###
TEXT
${lua get_mounted_data 10}${lua mount 1 fsys}${goto 175}${lua mount 1 size}${goto 275}${lua mount 1 use%}${goto 375}${lua mount 1 mount 10}
${lua gradbar {2,45,"${fs_used_perc /}",100,74,5,10,1,0xFFFFFF,.1,0xFFFFFF,.5,0x3366CC,.85,0x0000CC,1}}
${lua mount 7 fsys}${goto 175}${lua mount 7 size}${goto 275}${lua mount 7 use%}${goto 375}${lua mount 7 mount 10}
${lua gradbar
{2,106,"${fs_used_perc /home}",100,74,5,10,1,0xFFFFFF,.1,0xFFFFFF,.5,0x3366CC,.85,0x0000CC,1}}
${lua mount 2 fsys}${goto 175}${lua mount 2 size}${goto 275}${lua mount 2 use%}${goto 375}${lua mount 2 mount 10}
${lua gradbar {2,168,"${fs_used_perc /media/External}",100,74,5,10,1,0xFFFFFF,.1,0xFFFFFF,.5,0x3366CC,.85,0x0000CC,1}}
${lua mount 3 fsys}${goto 175}${lua mount 3 size}${goto 275}${lua mount 3 use%}${goto 375}${lua mount 3 mount 10}
${lua gradbar {2,230,"${fs_used_perc /media/sda5}",100,74,5,10,1,0xFFFFFF,.1,0xFFFFFF,.5,0x3366CC,.85,0x0000CC,1}}
${lua mount 4 fsys}${goto 175}${lua mount 4 size}${goto 275}${lua mount 4 use%}${goto 375}${lua mount 4 mount 10}
${lua gradbar {2,293,"${fs_used_perc /media/sdb5}",100,74,5,10,1,0xFFFFFF,.1,0xFFFFFF,.5,0x3366CC,.85,0x0000CC,1}}
${lua mount 5 fsys}${goto 175}${lua mount 5 size}${goto 275}${lua mount 5 use%}${goto 375}${lua mount 5 mount 10}
${lua gradbar {2,355,"${fs_used_perc /media/storage}",100,74,5,10,1,0xFFFFFF,.1,0xFFFFFF,.5,0x3366CC,.85,0x0000CC,1}}
${lua mount 6 fsys}${goto 175}${lua mount 6 size}${goto 275}${lua mount 6 use%}${goto 375}${lua mount 6 mount 10}
${lua gradbar {2,420,"${fs_used_perc /}",100,74,5,10,1,0xFFFFFF,.1,0xFFFFFF,.5,0x3366CC,.85,0x0000CC,1}}
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager
#own_window_colour white
own_window_class Conky
own_window_title Chronograph TEST
double_buffer yes
### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type normal
#own_window_argb_visual yes
### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 5
minimum_size 275 675 ## width, height
maximum_width 275 ## width
gap_x 10
gap_y 40
# tl, tm, tr
# ml, mm, mr
# bl, bm, br
alignment tl
#alignment top_middle
# Use Xft (anti-aliased font and stuff)
use_xft yes
#xftfont CorporateMonoExtraBold:size=9
xftfont monofur:bold:size=14
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes
uppercase no
draw_shades no
default_shade_color black
draw_outline no # amplifies text if yes
default_outline_color black
color1 000000 ## Black
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 0
# graph borders
draw_graph_borders yes #no
#default_graph_size 15 40
background yes
use_spacer none
text_buffer_size 256
no_buffers yes
short_units yes
# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
pad_percents 2
format_human_readable yes
short_units yes
update_interval 1
imlib_cache_size 0
# Maximum size of user text buffer, i.e. layout below TEXT line in config file
# (default is 16384 bytes)
# max_user_text 16384
# Desired output unit of all objects displaying a temperature. Parameters are
# either "fahrenheit" or "celsius". The default unit is degree Celsius.
temperature_unit Fahrenheit
####### Load Lua #########
lua_load ~/Conky/s11_clock.lua
lua_draw_hook_post main
lua_load ~/Conky/rings.lua
lua_draw_hook_pre main_rings
############################## End LUA ###
TEXT
${voffset 12}${goto 127}${font BlackChancery:bold:size=15}${color1}${platform f71882fg.656 temp 1}${font BlackChancery:bold:size=15}F
${voffset -8}${goto 95}${font BlackChancery:bold:size=25}${color1}1${goto 181}2
${voffset -11}${goto 115}${font BlackChancery:bold:size=15}${color1}CPU
${voffset -4}${goto 93}${font BlackChancery:bold:size=25}${color1}3${goto 179}4
${voffset -10}${goto 127}${font BlackChancery:bold:size=20}${color1}${cpu cpu0}%
${voffset 20}${goto 110}${font BlackChancery:bold:size=15}${color1}RAM
${voffset -7}${goto 90}${font BlackChancery:bold:size=12}${mem}${goto 140}/ ${memmax}${voffset 7}
${goto 110}${font BlackChancery:bold:size=15}${color1}SWAP
${voffset -7}${goto 90}${font BlackChancery:bold:size=12}${swap}${goto 140}/ ${swapmax}
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager
#own_window_colour white
own_window_class Conky
own_window_title Chronograph TEST
double_buffer yes
### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type normal
#own_window_argb_visual yes
### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 5
minimum_size 275 1100 ## width, height
maximum_width 275 ## width
gap_x -165
gap_y 25
### alignment values or top_left, bottom_right, etc
# tl, tm, tr
# ml, mm, mr
# bl, bm, br
#alignment tl
alignment top_middle
use_xft yes
xftfont monofur:bold:size=14
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes
uppercase no
draw_shades no
default_shade_color black
draw_outline no # amplifies text if yes
default_outline_color black
color1 000000 ## Black
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 0
# graph borders
draw_graph_borders yes #no
#default_graph_size 15 40
background yes
use_spacer none
text_buffer_size 256
no_buffers yes
short_units yes
pad_percents 2
format_human_readable yes
short_units yes
imlib_cache_size 0
temperature_unit Fahrenheit
update_interval 1
### Load Lua ###########################################################
lua_load ~/Conky/rings_2.lua
lua_draw_hook_pre main_rings
############################## End LUA Settings ###
TEXT
#${lua conky_draw_bg 132 3 3 264 264 0x000000 0.5}
#${lua conky_draw_bg 98 37 37 196 196 0xFFFFFF 0.2}
#${lua conky_draw_bg 68 67 67 136 136 0x000000 0.4}
#${lua conky_draw_bg 35 100 100 70 70 0x000000 0.3}
${voffset 10}${goto 150}${font BlackChancery:bold:size=15}${color1}/root
${voffset -10}${goto 125}${font BlackChancery:size=10}Used ${goto 190}${fs_used /}
${goto 125}Size ${goto 190}${fs_size /}
${goto 145}${font BlackChancery:bold:size=15}${color1}/home
${voffset -10}${goto 125}${font BlackChancery:size=10}Used ${goto 190}${fs_used /home}
${goto 125} Size${goto 190}${fs_size /home}
${goto 132}${font BlackChancery:bold:size=15}${color1}External
${voffset -5}${goto 122}${font BlackChancery:size=12}Used ${goto 190}${fs_used /media/external}
${goto 122}Size${goto 190}${fs_size /media/external}
${goto 138}${font BlackChancery:bold:size=15}${color1}Videos
${voffset -5}${goto 122}${font BlackChancery:size=12}Used ${goto 190}${fs_used /media/sdb1}
${goto 122}Size${goto 190}${fs_size /media/sdb1}
${goto 148}${font BlackChancery:size=20}${hddtemp /dev/sdb}F
${voffset -9}${goto 128}${font BlackChancery:bold:size=15}${color1}Software
${voffset -5}${goto 122}${font BlackChancery:size=12}Used ${goto 190}${fs_used /media/sdd1}
${goto 122}Size${goto 190}${fs_size /media/sdd1}
${goto 148}${font BlackChancery:size=20}${hddtemp /dev/sdd}F
${voffset -15}${goto 134}${font BlackChancery:bold:size=15}${color1}Storage
${voffset -5}${goto 122}${font BlackChancery:size=12}Used ${goto 190}${fs_used /media/storage}
${goto 122}Size${goto 190}${fs_size /media/storage}
${goto 148}${font BlackChancery:size=20}${hddtemp /dev/sdc}F
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# fiddle with window
use_spacer yes
use_xft yes
# Update interval in seconds
update_interval 3
# Minimum size of text area
minimum_size 1100 200
maximum_width 1100
override_utf8_locale yes
# Draw shades?
draw_shades yes
# Text stuff
draw_outline yes # amplifies text if yes
draw_borders no
#font
xftfont Arial:size=9
uppercase no # set to yes if you want all text to be in uppercase
# Stippled borders?
stippled_borders 3
# border margins
border_margin 9
# border width
border_width 10
# Default colors and also border colors, grey90 == #e5e5e5
default_color cbcbcb
own_window_colour brown
own_window_transparent yes
# Text alignment, other possible values are commented
#alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right
alignment top_middle
# Gap between borders of screen and text
gap_x -965
gap_y 30
imlib_cache_size 0
TEXT
${texeci 500 bash $HOME/Accuweather_Conky_USA_Images/acc_usa_images}${image $HOME/Accuweather_Conky_USA_Images/cc.png -p 0,70 -s 180x108}
${font BlackChancery:bold:size=15}${execpi 600 sed -n '3p' $HOME/Accuweather_Conky_USA_Images/curr_cond}${font BlackChancery:bold:size=12}${goto 525}${execpi 600 sed -n '6p' $HOME/Accuweather_Conky_USA_Images/tod_ton} ${goto 750}${execpi 600 sed -n '11p' $HOME/Accuweather_Conky_USA_Images/tod_ton} ${goto 975} ${execpi 600 sed -n '16p' $HOME/Accuweather_Conky_USA_Images/tod_ton}${font BlackChancery:bold:size=10}
${goto 200}TEMP:$color${goto 325}${execpi 600 sed -n '4p' $HOME/Accuweather_Conky_USA_Images/curr_cond}°F (${execpi 600 sed -n '5p' $HOME/Accuweather_Conky_USA_Images/curr_cond}°F)
${goto 200}WIND:$color${goto 325}${execpi 600 sed -n '6p' $HOME/Accuweather_Conky_USA_Images/curr_cond} ${execpi 600 sed -n '14p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${goto 200}HUM:$color${goto 325}${execpi 600 sed -n '7p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${goto 200}DEW:$color${goto 325}${execpi 600 sed -n '11p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${goto 200}SUNRISE:$color${goto 325}${execpi 600 sed -n '15p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${goto 200}SUNSET:$color${goto 325}${execpi 600 sed -n '16p' $HOME/Accuweather_Conky_USA_Images/curr_cond}
${image $HOME/Accuweather_Conky_USA_Images/7.png -p 480,50 -s 180x108}
${image $HOME/Accuweather_Conky_USA_Images/12.png -p 705,50 -s 180x108}
${image $HOME/Accuweather_Conky_USA_Images/17.png -p 930,50 -s 180x108}