because smpalyer already in VSIDO, my thinking was to add another "sm" program , smtube to play videos directly from You Tube
however, download would be huge because all of needed dependencies, so I gave up on this idea
Is there any  nice & small video player to add ?
Thanks!

found this un-known (for me) web browser called Pale Moon
It has its own web page : http://linux.palemoon.org/
and repositories for Debian 8
https://software.opensuse.org/download.html?project=home%3Astevenpusser&package=palemoon

just wondering, if anybody tried to download and install this browser in VSIDO and what were your experiences ?

thanks

It is not a good idea to directly listen live radio stream in your browser, because it uses lots of resources and slows things down.
The best apps I find was "streamtuner2", it is a small download, has nice GUI , and has a vast selection of live broadcasting to choose from.
In Preferences the installed audio/video player needs to be entered to make it work.
For some reason "smplayer" buffers up to 20 % before plays, so I am using "audacious" instead, which plays immediately.
Maybe "streamtuner2" and  "audacious" could be added into next release, (and remove "smplayer" ?)
Hope this helps someone to enjoy their online listening experience.

during boot, I have seen message about bluetooth started
confirmed later in synaptic that bluetooth+bluez was installed.....yet nowhere to be found in menu Settings
managed to get my bluetooth headphone working, by adding blueman and pulseaudio-module-bluetooth pkg-es
however, when looked for freshly installed  Blueman in menu, not found !
Of course I can start in terminal or with Application Finder, but do I really want to go thru that every time?
Any  new pkg needs to  manually added to the menu ?
Thanks!

wicd on top right gave me "scanning....no wireless network find"
than ollowed instructions on "how to"
ifconfig -a
sudo su
ceni

still not working, below is my terminal output ,

vsido@vsido:~$ ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.16  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::21e:37ff:fe82:ac72  prefixlen 64  scopeid 0x20<link>
        ether 00:1e:37:82:ac:72  txqueuelen 1000  (Ethernet)
        RX packets 96681  bytes 133974510 (127.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 58021  bytes 5174844 (4.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 20  memory 0xfe000000-fe020000 

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 553  bytes 55150 (53.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 553  bytes 55150 (53.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.5.17  netmask 255.255.255.0  broadcast 192.168.5.255
        inet6 fe80::21d:e0ff:fe44:74c7  prefixlen 64  scopeid 0x20<link>
        ether 00:1d:e0:44:74:c7  txqueuelen 1000  (Ethernet)
        RX packets 683  bytes 231565 (226.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 544  bytes 67637 (66.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

vsido@vsido:~$

   
root@vsido:/home/vsido# ceni
Configuring interface wlan0=wlan0 (inet)
/bin/run-parts --exit-on-error --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/ethtool
run-parts: executing /etc/network/if-pre-up.d/wireless-tools
run-parts: executing /etc/network/if-pre-up.d/wpasupplicant
wpa_supplicant: wpa-driver nl80211,wext (default)
wpa_supplicant: /sbin/wpa_supplicant -s -B -P /run/wpa_supplicant.wlan0.pid -i wlan0 -D nl80211,wext -C /run/wpa_supplicant
Starting /sbin/wpa_supplicant...
wpa_supplicant: creating sendsigs omission pidfile: /run/sendsigs.omit.d/wpasupplicant.wpa_supplicant.wlan0.pid
wpa_supplicant: ctrl_interface socket located at /run/wpa_supplicant/wlan0
wpa_supplicant: configuring network block -- 0
wpa_supplicant: wpa-ssid "D-LINK" -- OK
wpa_supplicant: wpa-key-mgmt NONE -- OK
wpa_supplicant: wpa-wep-key0 ***** -- OK
wpa_supplicant: wpa-wep-tx-keyidx 0 -- OK
wpa_supplicant: enabling network block 0 -- OK

/sbin/dhclient -v -pf /run/dhclient.wlan0.pid -lf /var/lib/dhcp/dhclient.wlan0.leases -I -df /var/lib/dhcp/dhclient6.wlan0.leases wlan0    
Internet Systems Consortium DHCP Client 4.3.3
Copyright 2004-2015 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/wlan0/00:1d:e0:44:74:c7
Sending on   LPF/wlan0/00:1d:e0:44:74:c7
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPREQUEST of 192.168.5.17 on wlan0 to 255.255.255.255 port 67
DHCPOFFER of 192.168.5.17 from 192.168.5.1
DHCPACK of 192.168.5.17 from 192.168.5.1
bound to 192.168.5.17 -- renewal in 18793 seconds.
/bin/run-parts --exit-on-error --verbose /etc/network/if-up.d
run-parts: executing /etc/network/if-up.d/avahi-autoipd
run-parts: executing /etc/network/if-up.d/avahi-daemon
run-parts: executing /etc/network/if-up.d/ethtool
run-parts: executing /etc/network/if-up.d/mountnfs
run-parts: executing /etc/network/if-up.d/ntpdate
run-parts: executing /etc/network/if-up.d/upstart
run-parts: executing /etc/network/if-up.d/wpasupplicant

Press Enter key to continue ...

any suggestion ?
thanks!