@ jedi ....

I ran into the same thing you did.  If the bars are too close, they loose the centre line (the blue bar).  Something weird going on with that script.

Anyway, I moved things around a bit, this gives you a space above ${kernel} to play with and I scrolled the date above your distro info.  You may not like it, sorry but it's the best I can do.  I'm no LUA expert either.

Also, I don't have battery nor wlan0 so the values shown are hard coded, your commands are commented our above TEXT and the bars above them are cpu1 and cpu2 in the LUA script.  The lua script still has your battery and wlan sections  ... just comment out the cpu1 and 2 sections and incomment the Battery and Wlan stuff, I 'think' I configured them correctly.

I added a white background so it can be seen on dark backgrounds.

The modified conky:
##################################################
# killall conky && conky -c /home/jed/Conky/sysledconkyrc &
# killall conky && conky -c ~/jed/Conky/sysledconkyrc &
##################################################
background yes
update_interval 0.5
double_buffer yes
no_buffers yes
imlib_cache_size 0
override_utf8_locale yes
own_window yes
own_window_type normal
own_window_transparent yes
## own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below ## Jed's Line
own_window_hints undecorate,skip_taskbar,skip_pager,below
own_window_class conky
own_window_title horizleds
border_inner_margin 0
border_outer_margin 0
minimum_size 1910 55 # testing with 500
## minimum_size 1910 55 ## Jed had 1920 but the 'gap_x 5' pushed it 5 pixels off the screen
maximum_width 1910
alignment tl
gap_x 30
gap_y -5
default_color 4B60B4
text_buffer_size 512
use_xft yes
xftfont monofur:bold:size=11
xftalpha 1
cpu_avg_samples 2
net_avg_samples 1

lua_load ~/jed/Conky/LUA/leds.lua
lua_draw_hook_post main_bars

#${goto 15}MOBO Temp ${color ff6100}${hwmon 2 temp 2}°C${color 4B60B4}${goto 135}|${goto 160}CPU Socket Temp ${color ff6100}${hwmon 1 temp 1}°C${voffset -15}${color 4B60B4} ${goto 1050}Kernel: ${kernel} ${goto 1420}Up:${color ff6100} ${uptime}${color 4B60B4}${goto 1630}${scroll 40 1${execi 2600 cat /etc/issue.net}-VSIDO}
#${goto 365}${color 4B60B4}Avg CPU Use: ${color 3DBA2F}${cpu cpu0}% ${color 4B60B4}${goto 483}|${goto 500}${color 4B60B4}RAM Use:${color 3DBA2F}${mem} / ${memmax}${color 4B60B4}${goto 735}Bat:${color 3DBA2F}${battery_percent BAT0}% ${color ff6100}${battery_time BAT0}${color 4B60B4}${goto 875}|${goto 900}WiFi Signal: ${color 3DBA2F}${wireless_link_qual_perc wlan0}%
lua_load /media/5/Conky/LUA/draw-bg.lua
TEXT
${lua conky_draw_bg 10 0 0 0 0 0xffffff 0.2}
${goto 165}|${goto 350}|${goto 525}|${goto 750}|${goto 920}${color 3DBA2F}${memperc}${goto 936}%${color} |${goto 1040}${time %T}${goto 1190}|${goto 1265}${scroll 23 1${time %A %e %b %Y} }${goto 1500}|${goto 1680}|
${goto 15}MOBO Temp ${color ff6100}${hwmon 2 temp 2}°C${color}\
${goto 165}|   CPU Socket Temp ${color ff6100}${hwmon 1 temp 1}°C${color}\
${goto 350}|   Avg CPU Use: ${color 3DBA2F}${cpu cpu0}%${color}\
${goto 525}|   ${kernel}${goto 750}\
${goto 750}| RAM Use: ${color 3DBA2F}${mem} / ${memmax}${color}\
${goto 950}|         Up:${color ff6100} ${uptime}${color}${goto 1190}|\
${goto 1210}${scroll 40 1${execi 86400 cat /etc/issue.net}-VSIDO}\
${goto 1500}|  Bat: ${color 3DBA2F}85%${goto 1610}${color ff6100}16:44:52${color}\
${goto 1680}|   WiFi Signal: ${color 3DBA2F}100%${color}

and the new leds.lua
--[[ BARGRAPH WIDGET
v1.3 by wlourf (03 march 2010)
This widget draw a simple bar like (old) equalizers on hi-fi systems.
http://u-scripts.blogspot.com/
        Tweaked by McLovin, then borked by jedi
The arguments are :
- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'...
  or you can set it to "" if you want to display a numeric value with arg=numeric_value
    - "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument.
      If you would not use an argument in the Conky variable, use ''.
- "max" is the maximum value of the bar. If the Conky variable outputs a percentage, use 100.
- "nb_blocks" is the umber of block to draw
- "cap" id the cap of a block, possibles values are CAIRO_LINE_CAP_ROUND , CAIRO_LINE_CAP_SQUARE or CAIRO_LINE_CAP_BUTT
  see http://www.cairographics.org/samples/set_line_cap/
- "xb" and "yb" are the coordinates of the bottom left point of the bar, or the center of the circle if radius>0
- "w" and "h" are the width and the height of a block (without caps), w has no effect for "circle" bar
- "space" is the space betwwen two blocks, can be null or negative
- "bgc" and "bga" are background colors and alpha when the block is not LIGHT OFF
- "fgc" and "fga" are foreground colors and alpha when the block is not LIGHT ON
- "alc" and "ala" are foreground colors and alpha when the block is not LIGHT ON and ALARM ON
- "alarm" is the value where blocks LIGHT ON are in a different color (values from 0 to 100)
- "led_effect" true or false : to show a block with a led effect
- "led_alpha" alpha of the center of the led (values from 0 to 1)
- "smooth" true or false : colors in the bar has a smooth effect
- "mid_color",mid_alpha" : colors of the center of the bar (mid_color can to be set to nil)
- "rotation" : angle of rotation of the bar (values are 0 to 360 degrees). 0 = vertical bar, 90 = horizontal bar
- "radius" : draw the bar on a circle (it's no more a circle, radius = 0 to keep bars)
- "angle_bar"  : if radius>0 angle_bar is the angle of the bar
v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 March 2010) added parameters radius & angle_bar to draw the bar in a circular way
]]

require 'cairo'

----------------START OF PARAMETERS ----------
function conky_main_bars()
local bars_settings={
{ -- Graph for MOBO Temp
name="hwmon 2 temp 2",
arg="hwmon 2 temp 2",
max=100,
alarm=40,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff6100,0},
     alarm_led={0xff6100,1},
blocks=50, --35
x=10, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
{ -- Graph for CPU Socket Temp
name="hwmon 1 temp 1",
arg="hwmon 1 temp 1",
max=100,
alarm=40,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff6100,0},
     alarm_led={0xff6100,1},
blocks=50, --35,
x=190, y=20, --x=175, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
{ -- Graph for CPU Socket Temp
name="cpu",
arg="cpu0",
max=100,
alarm=100,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
     alarm_led={0xff0000,1},
blocks=50, --35,
x=370, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
{ -- Graph for Memory
name="memperc",
arg="",
max=100,
alarm=60,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
     alarm_led={0xff0000,1},
x=765, y=20, --x=510,y=70,
blocks=50,
space=1,
height=2,width=10,
angle=90,
led_effect="e",
cap="r",
},
{ -- Graph for WiFi Signal strength
name="cpu",
arg="cpu1",
max=100,
alarm=100,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
     alarm_led={0xff0000,1},
blocks=50,
x=1520, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
{ -- Graph for WiFi Signal strength
name="cpu",
arg="cpu2",
max=100,
alarm=100,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
     alarm_led={0xff0000,1},
blocks=50,
x=1700, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
--[[ { -- Graph for Battery power
name="battery_percent",
arg="BAT0",
max=100,
alarm=100,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
     alarm_led={0xff0000,1},
blocks=50,
x=1520, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
{ -- Graph for WiFi Signal strength
name="wireless_link_qual_perc",
arg="wlan0",
max=100,
alarm=100,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
     alarm_led={0xff0000,1},
blocks=50,
x=1700, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
]]
--[[ { -- Graph for Root
name="fs_used_perc",
arg="/",
max=100,
alarm=75,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
    alarm_led={0xff0000,1},
blocks=35,
x=1260, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
{ -- Graph for Home
name="fs_used_perc",
arg="/home",
max=100,
alarm=75,
bg_colour={0x000000,0.75},
bg_led={0x3c3c3c,0.5},
fg_colour={0x000000,1},
fg_led={0x48a3fd,1},
alarm_colour={0xff0000,0},
    alarm_led={0xff0000,1},
blocks=35,
x=610, y=20,
height=2,width=10,
angle=90,
led_effect="e",
space=1,
cap="r",
},
]]
}
-----------END OF PARAMETERS--------------
if conky_window == nil then return end

local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)

cr = cairo_create(cs)
--prevent segmentation error when reading cpu state
    if tonumber(conky_parse('${updates}'))>3 then
        for i in pairs(bars_settings) do

        draw_multi_bar_graph(bars_settings[i])

        end
    end
cairo_destroy(cr)
cairo_surface_destroy(cs)

end



function draw_multi_bar_graph(t)
cairo_save(cr)
--check values
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end

--set default values
if t.x == nil then t.x = conky_window.width/2 end
if t.y == nil then t.y = conky_window.height/2 end
if t.blocks == nil then t.blocks=10 end
if t.height == nil then t.height=10 end
if t.angle == nil then t.angle=0 end
t.angle = t.angle*math.pi/180
--line cap style
if t.cap==nil then t.cap = "b" end
local cap="b"
for i,v in ipairs({"s","r","b"}) do
if v==t.cap then cap=v end
end
delta=0
if t.cap=="r" or t.cap=="s" then delta = t.height end
if cap=="s" then cap = CAIRO_LINE_CAP_SQUARE
elseif cap=="r" then
cap = CAIRO_LINE_CAP_ROUND
elseif cap=="b" then
cap = CAIRO_LINE_CAP_BUTT
end
--end line cap style
--if t.led_effect == nil then t.led_effect="r" end
if t.width == nil then t.width=20 end
if t.space == nil then t.space=2 end
if t.radius == nil then t.radius=0 end
if t.angle_bar == nil then t.angle_bar=0 end
t.angle_bar = t.angle_bar*math.pi/360 --halt angle

--colours
if t.bg_colour == nil then t.bg_colour = {0xffffff,0.5} end
if #t.bg_colour~=2 then t.bg_colour = {0xffffff,0.5} end
if t.fg_colour == nil then t.fg_colour = {0xffffff,1} end
if #t.fg_colour~=2 then t.fg_colour = {0xffffff,1} end
if t.alarm_colour == nil then t.alarm_colour = t.fg_colour end
if #t.alarm_colour~=2 then t.alarm_colour = t.fg_colour end

if t.mid_colour ~= nil then
for i=1, #t.mid_colour do
    if #t.mid_colour[i]~=3 then
    print ("error in mid_color table")
    t.mid_colour[i]={1,0xFFFFFF,1}
    end
end
    end

if t.bg_led ~= nil and #t.bg_led~=2 then t.bg_led = t.bg_colour end
if t.fg_led ~= nil and #t.fg_led~=2 then t.fg_led = t.fg_colour end
if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end

if t.led_effect~=nil then
if t.bg_led == nil then t.bg_led = t.bg_colour end
if t.fg_led == nil then t.fg_led = t.fg_colour end
if t.alarm_led == nil  then t.alarm_led = t.fg_led end
end


if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
if t.smooth == nil then t.smooth = false end

if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end

if t.reflection_alpha==nil then t.reflection_alpha=0 end
if t.reflection_length==nil then t.reflection_length=1 end
if t.reflection_scale==nil then t.reflection_scale=1 end

--end of default values


local function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end


--functions used to create patterns

local function create_smooth_linear_gradient(x0,y0,x1,y1)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end

local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
local pat =  cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end

local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
return pat
end

local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
if mode==3 then
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
else
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
end
return pat
end






local function draw_single_bar()
--this fucntion is used for bars with a single block (blocks=1) but
--the drawing is cut in 3 blocks : value/alarm/background
--not zvzimzblr for circular bar
local function create_pattern(col_alp,col_led,bg)
local pat

if not t.smooth then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
elseif  t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))
end
else
if bg then
pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(t.bg_colour))
else
pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
end
end
return pat
end

local y1=-t.height*pct/100
local y2=nil
if pct>(100*t.alarm/t.max) then
y1 = -t.height*t.alarm/100
y2 = -t.height*pct/100
if t.smooth then y1=y2 end
end

if t.angle_bar==0 then

--block for fg value
pat = create_pattern(t.fg_colour,t.fg_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,0,t.width,y1)
cairo_fill(cr)

-- block for alarm value
if not t.smooth and y2 ~=nil then
pat = create_pattern(t.alarm_colour,t.alarm_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,y1,t.width,y2-y1)
cairo_fill(cr)
y3=y2
else
y2,y3=y1,y1
end
-- block for bg value
cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
pat = create_pattern(t.bg_colour,t.bg_led,true)
cairo_set_source(cr,pat)
cairo_pattern_destroy(pat)
cairo_fill(cr)
end
end  --end single bar






local function draw_multi_bar()
--function used for bars with 2 or more blocks
for pt = 1,t.blocks do
--set block y
local y1 = -(pt-1)*(t.height+t.space)
local light_on=false

--set colors
local col_alp = t.bg_colour
local col_led = t.bg_led
if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
if pct>=(pcb*(pt-1))  then
light_on = true
col_alp = t.fg_colour
col_led = t.fg_led
if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then
col_alp = t.alarm_colour
col_led = t.alarm_led
end
end
end

--set colors
--have to try to create gradients outside the loop ?
local pat

if not t.smooth then
if t.angle_bar==0 then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)
elseif  t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))
end
else
if t.led_effect=="a"  then
pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
0, 0, t.radius+(t.height+t.space)*(pt),
col_alp,col_led,3)
else
pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))
end

end
else

if light_on then
if t.angle_bar==0 then
pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
else
pat = create_smooth_radial_gradient(0, 0, (t.height+t.space),  0,0,(t.blocks+1)*(t.height+t.space),2)
end
else
pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(t.bg_colour))
end
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)

--draw a block
if t.angle_bar==0 then
cairo_move_to(cr,0,y1)
cairo_line_to(cr,t.width,y1)
else
cairo_arc( cr,0,0,
t.radius+(t.height+t.space)*(pt)-t.height/2,
-t.angle_bar -math.pi/2 ,
t.angle_bar -math.pi/2)
end
cairo_stroke(cr)
end
end




local function setup_bar_graph()
--function used to retrieve the value to display and to set the cairo structure
if t.blocks ~=1 then t.y=t.y-t.height/2 end

local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
else
value = tonumber(t.arg)
end

if value==nil then value =0 end

pct = 100*value/t.max
pcb = 100/t.blocks

cairo_set_line_width (cr, t.height)
cairo_set_line_cap  (cr, cap)
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle)

local matrix0 = cairo_matrix_t:create()
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)



--call the drawing function for blocks
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
else
draw_multi_bar()
end

--dot for reminder
--[[
if t.blocks ~=1 then
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
cairo_fill(cr)
else
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,0,3,0,2*math.pi)
cairo_fill(cr)
end
]]
--call the drawing function for reflection and prepare the mask used
if t.reflection_alpha>0 and t.angle_bar==0 then
local pat2
local matrix1 = cairo_matrix_t:create()
if t.angle_bar==0 then
pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
if t.reflection=="t" then
cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
elseif t.reflection=="r" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
elseif t.reflection=="l" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
else --bottom
cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
end
end
cairo_transform(cr,matrix1)

if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
cairo_translate(cr,0,-t.height/2)
else
draw_multi_bar()
end


cairo_set_line_width(cr,0.01)
cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
if t.angle_bar==0 then
cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
end
cairo_clip_preserve(cr)
cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
cairo_stroke(cr)
cairo_mask(cr,pat2)
cairo_pattern_destroy(pat2)
cairo_set_operator(cr,CAIRO_OPERATOR_OVER)

end --reflection

end --setup_bar_graph()

--start here !
setup_bar_graph()
cairo_restore(cr)
end

Good morning Jed ...

I'm up early, have to go out, but when I come back I will be looking at this.
What is your screen width? 1920?

EDIT: never mind.....

Quoteminimum_size 1920 55

DUH!!!

It'll give me something to play with.

^ OK, just curious anyway.

Quote from: PackRat on June 25, 2013, 09:08:17 PM
I can use the lua background with the weather -



but the image files are washed out, or behind the background.

It's how you use the LUA script ...

Clean crisp images (on the right):
lua_load /media/5/Conky/LUA/draw-bg.lua
TEXT
${lua conky_draw_bg 10 0 0 0 0 0x000000 0.3}\

washed out (on the left):
lua_load /media/5/Conky/LUA/draw-bg.lua
lua_draw_hook_pre draw_bg 10 0 0 0 0 0x000000 0.2
TEXT


I've never used VSIDO with Xfce - just OpenBox - tested Xfce but used OB.

Quote from: PackRat on June 25, 2013, 08:14:25 PM
The Tao phrase is using a semitransparent lua background, the weather uses conky argb settings so that it will be transparent with a compositor - compton in this case. Same one line system info conky that I've used for years. Fluxbox, VSIDO.

Curious as to why you can't use draw-bg.lua(??) with weather conky?
I use compton and use draw-bg.lua with all my conkys. EDIT: OOPS! less one.

I see your 3 and raise you 1!

• top-left: v9000 lua weather
• top-centre: SECTOR11 lua conky - sorry - no lua background *
• top-right: my system conky
• bottom-right: email, exchange, desktop conky

*
S = cpu1
E = cpu2
C = cpu3
T = cpu0
O = fs_free_perc - root
R = fs_used_perc - root
- = memperc
1 = fs_free_perc - home
1 = fs_used_perc - home

Told ya before jedi, conky is a 1 Step program.

Quote1. Admitted that we were powerless over conky, and love it!

Testing:

No changes in sensors here ... all conkys working as written.

wifi not an issue - cable connect.

Seems fine, been running it since shortly after noon, although I get the feeling it's a bit more CPU intensive.  Could be me though.

@ lwfitz jedi and PackRat

Really nice stuff guys....

hahahahaha Every time I saw your name I think of a friend that drove a Dodge RAM, that was his blue baby, back in the mid-late 80's.  So no, I won't forget you.

Here's hoping your wife agrees with you. 

Hey, just having fun with ya.  Of course I remember you. 

Quote from: PackRat on May 18, 2013, 04:46:13 PM
I am using the:

Code Select Expand

aptitude search "~U" | wc -l

I suspect an interactive conky could be made out of these so that clicking on the updates would launch the update terminal.

I'd bet money mrpeachy or falldown could do that too.

Made me go looking in my aliases file, and there they were, hold outs from years back when I used aptitude, lines 138, 139 and 140:

alias search='aptitude search'
alias show='aptitude show'
alias avail='aptitude search "~U" | wc -l | tail'

not being "bash literate" I would never have thought of a bash script ... must look at that closer.

18 May 13 | 17:15:34 ~
    $ avail
2

18 May 13 | 17:20:56 ~
    $
NOTE: The two being held back

Perfect for a new install ... what about an install that is up and running with a liquorix kernel already.

Is there any way to do this?

Thanks ... had to resize this one

And still working on circles....

Just another general run of the mill conky to show off the new GNUS VSIDO (Debian SID Class) that goes where no other sub goes.


The conky (graphics are optional):
###  Begin Window Settings  ##################################################
own_window yes

# Use the Xdbe extension? (eliminates flicker)
# It is highly recommended to use own window with this one
# so double buffer won't be so big.
double_buffer yes

own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager
own_window_class Conky
own_window_title General Conky

### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type override
# own_window_argb_visual yes

### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 150

minimum_size 270 965 ## width, height
maximum_width 270 ## width

gap_x 10 ### left &right
gap_y 10 ### up & down

alignment tl
####################################################  End Window Settings  ###
###  Font Settings  ##########################################################
# Use Xft (anti-aliased font and stuff)
use_xft yes
xftfont monofur:bold:size=12

# Alpha of Xft font. Must be a value at or between 1 and 0 ###
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes

uppercase no
######################################################  End Font Settings  ###
###  Color Settings  #########################################################
draw_shades yes #no # amplifies text if yes
default_shade_color 000000

draw_outline no # amplifies text if yes
default_outline_color 000000

default_color DCDCDC #220 220 220 Gainsboro
color0 8FBC8F #143 188 143 DarkSeaGreen
color1 778899 #119 136 153 LightSlateGray
color2 FF8C00 #255 140   0 DarkOrange
color3 7FFF00 #127 255   0 Chartreuse
color4 FFA07A #255 160 122 LightSalmon
color5 FFDEAD #255 222 173 NavajoWhite
color6 00BFFF #  0 191 255 DeepSkyBlue
color7 00FFFF #  0 255 255 Cyan
color8 FFFF00 #255 255   0 Yellow
color9 FF0000 #255   0   0 Red
#####################################################  End Color Settings  ###
###  Borders Section  ########################################################
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 0
# graph borders
draw_graph_borders yes #no
#####################################################  End Borders Secton  ###
###  Miscellaneous Section  ##################################################

# Boolean value, if true, Conky will be forked to background when started.
background no

# Adds spaces around certain objects to stop them from moving other things
# around, this only helps if you are using a mono font
# Options: right, left or none
use_spacer none

# Default and Minimum size is 256 - needs more for single commands that
# "call" a lot of text IE: bash scripts
text_buffer_size 256

# Subtract (file system) buffers from used memory?
no_buffers yes

# change GiB to G and MiB to M
short_units yes

# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
pad_percents 2

#   Maximum size of user text buffer, i.e. layout below TEXT line in config file
#  (default is 16384 bytes)
# max_user_text 16384

## default bar size
default_bar_size 200 20

# Width for $top name value (default 15 characters)
top_name_width 8

## Specify a default width and height for graphs.
## Example: 'default_graph_size 0 25'. This is particularly useful for execgraph
## and execigraph as they do not take size arguments
## default_graph_size 200 0

#draw_graph_borders no

##############################################  End Miscellaneous Section  ###
###  LUA Settings  ###########################################################
## Above and After TEXT - requires a composite manager or blinks.
##
# lua_load /media/5/Conky/LUA/dra2w-bg.lua
#TEXT
#${lua conky_draw_bg 10 0 0 0 0 0x000000 0.2}
#
## ${lua conky_draw_bg corner_radius x_position y_position width height color alpha}
##
## OR Both above TEXT (No composite manager required - no blinking!)
#
lua_load /media/5/Conky/LUA/draw-bg.lua
#lua_draw_hook_pre draw_bg 10 0 0 0 0 0x000000 0.2
### mount.lua ##################################################################
#
##instructions
##load script
##lua_load ~/path_to/mounted.lua
#lua_load /media/5/Conky/LUA/mounted.lua
## first lua command below text:
## ${lua get_mounted_data interval}, where interval is a number.  This starts data gathering
## to get output:
## ${lua mount partition_number data_type}, where partition number is a number
## data_type can be
## total - shows total number of partitions mounted, requires a partition_number also, use 1, could be used in an if_match
## fsys - shows filesystem
## size - shows space used in appropriate units
## free - shows free space in appropriate units
## use% - shows % used
## mount - shows mountpoint
#######################################################  End LUA Settings  ###

#digiThe all important - How often conky refreshes.
# If you have a "Crey" try: 0.2 - smokin' - but watch the CPU useage go UP!
update_interval 1 # in seconds

# stuff after 'TEXT' will be formatted on screen
TEXT
${lua conky_draw_bg 20 0 0 0 0 0x000000 0.4}\
  ${font Dock 51:size=40}${color1}Sector${color}${font}\
${image /media/5/My_Images/Sector11_Avatar/S11_falldown3.png -p 200,0 -s 60x60}\
${image /media/5/Conky/images/EVE.png -p -5,65 -s 80x80}
${image /media/5/Conky/images/Wall.E.png -p 205,65 -s 80x80}
${color5}${font LED_Mono:size=30}${alignc}${time %T}${font}${color}
${alignc}${color6}Easter${color}
${alignc}${exec ncal -e}
${alignc}SU MO ${color6}${time %b %Y}${color} FR SA
${goto 60}${color}${execp LAR=`date +%-d`; ncal -bh | sed '2d' | sed -e '1d' -e 's/\<'$LAR'\>/${color6}&${color}/' | sed ':a;N;$!ba;s/\n/\n${goto 60}/g'}
${voffset 5} Time online: ${alignr 15}${uptime_short}
${voffset 5}${alignc}${kernel}
${voffset 5}${alignc}${color5}Temperatures${color}
${alignc}CPU  ${color5}${platform f71882fg.2560 temp 1}${color}°\
     MB  ${color5}${platform f71882fg.2560 temp 2}${color}°
${alignc}GPU  ${color5}${nvidia temp}${color}°\
     HD  ${color5}${hddtemp /dev/sda}${color}°
${voffset 5}${alignc}${color5}Nvidia GPU${color}
GPU ${color5}${nvidia gpufreq} ${color}MHz${alignr 15}MEM ${color5}${nvidia memfreq} ${color}MHz
${voffset 5}${alignc}${color5}Disk Activity${color}
${goto 10}${diskiograph 50,250 FF0000 0000FF -t -l}${goto 10}${color1}${cpubar cpu4 50,250}${color}\
${voffset -35}${goto 80}SDA: R: ${diskio_read /dev/sda}
${goto 80}     W: ${diskio_write /dev/sda}
${voffset 9}${goto 60}${color1}${fs_bar /}${color}
${voffset -28}/Root   ${fs_size /}${goto 170}Used${goto 220}${fs_used_perc /}%
${goto 60}${color1}${fs_bar /home}${color}
${voffset -28}/Home   ${fs_size /home}${goto 170}Used${goto 220}${fs_used_perc /home}%
${goto 60}${color1}${fs_bar /media/5}${color}
${voffset -28} /M/5   ${fs_size /media/5}${goto 170}Used${goto 220}${fs_used_perc /media/5}%
${voffset 5} RAM    Used ${mem}${goto 170}Total ${memmax}
${voffset 5}${alignc}${color5}CPU${color}
${voffset 5}${goto 10}CPU1\
${voffset -8}${goto 60}${color1}${cpubar cpu1}${goto 60}${cpugraph cpu1 -t 20,200 FF0000 FFFF00}\
${voffset -12}${goto 70}${color}${if_match ${cpu cpu1}<10}  ${cpu cpu1}\
${else}${if_match ${cpu cpu1}<100} ${cpu cpu1}\
${else}${cpu cpu1}${endif}${endif}%
${voffset 8}${goto 10}CPU2\
${voffset -8}${goto 60}${color1}${cpubar cpu2}${goto 60}${cpugraph cpu2 -t 20,200 FF0000 FFFF00}\
${voffset -12}${goto 70}${color}${if_match ${cpu cpu2}<10}  ${cpu cpu2}\
${else}${if_match ${cpu cpu2}<100} ${cpu cpu2}\
${else}${cpu cpu2}${endif}${endif}%
${voffset 8}${goto 10}CPU3\
${voffset -8}${goto 60}${color1}${cpubar cpu3}${goto 60}${cpugraph cpu3 -t 20,200 FF0000 FFFF00}\
${voffset -12}${goto 70}${color}${if_match ${cpu cpu3}<10}  ${cpu cpu3}\
${else}${if_match ${cpu cpu3}<100} ${cpu cpu3}\
${else}${cpu cpu3}${endif}${endif}%
${voffset 8}${goto 10}Avg\
${voffset -8}${goto 60}${color1}${cpubar cpu0}${goto 60}${cpugraph cpu0 -t 20,200 FF0000 FFFF00}\
${voffset -12}${goto 70}${color}${if_match ${cpu cpu0}<10}  ${cpu cpu0}\
${else}${if_match ${cpu cpu0}<100} ${cpu cpu0}\
${else}${cpu cpu0}${endif}${endif}%           μm ${freq_g}
${voffset 8}${alignc}${color5}Network${color}
${voffset 5} Down${voffset -6}${goto 60}${color1}${downspeedgraph eth0 20,200 0000ff fff000 5 -lt}\
${voffset -12}${goto 90}${color}${downspeed eth0}
${voffset 5} Up${voffset -6}${goto 60}${color1}${upspeedgraph eth0 20,200 0000ff fff000 5 -lt}\
${voffset -12}${goto 90}${color}${upspeed eth0}
${voffset 8}${alignc}${color5}Processes${color}
Total ${color5}${processes}${color}${alignr 15}Running ${color5}${running_processes}${color}
${goto 220}${color0}mem${color}
Name${goto 90}${color7}cpu${color}   mem  ${color1}uid${color}${goto 220}${color0}res${color}
${cpubar cpu0 0,250}
${top name 1}${goto 75}${color7}${top cpu 1}${color}${color}${top mem 1}${color1}${top uid 1}${color0}${goto 220}${top mem_res 1}${color}
${top name 2}${goto 75}${color7}${top cpu 2}${color}${top mem 2}${color1}${top uid 2}${color0}${goto 220}${top mem_res 2}${color}
${top name 3}${goto 75}${color7}${top cpu 3}${color}${top mem 3}${color1}${top uid 3}${color0}${goto 220}${top mem_res 3}${color}
${top name 4}${goto 75}${color7}${top cpu 4}${color}${top mem 4}${color1}${top uid 4}${color0}${goto 220}${top mem_res 4}${color}
${top name 5}${goto 75}${color7}${top cpu 5}${color}${top mem 5}${color1}${top uid 5}${color0}${goto 220}${top mem_res 5}${color}
${top name 6}${goto 75}${color7}${top cpu 6}${color}${top mem 3}${color1}${top uid 6}${color0}${goto 220}${top mem_res 6}${color}
${top name 7}${goto 75}${color7}${top cpu 7}${color}${top mem 7}${color1}${top uid 7}${color0}${goto 220}${top mem_res 7}${color}
${top name 8}${goto 75}${color7}${top cpu 8}${color}${top mem 8}${color1}${top uid 8}${color0}${goto 220}${top mem_res 8}${color}
${top name 9}${goto 75}${color7}${top cpu 9}${color}${top mem 9}${color1}${top uid 9}${color0}${goto 220}${top mem_res 9}${color}

Are they FB only?